Fujitsu ETERNUS DX60 S3 User Manual page 160

Chapter 1 System Management
1.9 Event/Dump Management
5
Click the [Download] button to save the exported panic dump.
When exporting of the panic dump has been completed, save the panic dump immediately.
If "Non-segmentation" is selected in the "Dump File Segment Size" field, the [Download] button
becomes inactive after the log file has been saved. Proceed to
 A dialog box to download the file appears.
6
Save the panic dump.
The default file name is as follows.
• For the ETERNUS DX8700 S3/DX8900 S3
"Panic_serial number for the ETERNUS DX_YYYY-MM-DD_hh-mm-ss_CExCMy_serial number for panic
dump file.zlg"
(YYYY-MM-DD_hh-mm-ss: the date and time when the panic has occurred. x: CE number in which
the panic has occurred. y: CM number in which the panic has occurred. When a panic dump file is
segmented, the segmented panic dump files are given the same name and numbered serially
(01 -).)
• For the other models
"Panic_serial number for the ETERNUS DX_YYYY-MM-DD_hh-mm-ss_CMy_serial number for panic
dump file.zlg"
(YYYY-MM-DD_hh-mm-ss: the date and time when the panic has occurred. y: CM number in which
the panic has occurred. When a panic dump file is segmented, the segmented panic dump files are
given the same name and numbered serially (01 -).)
When saving segmented panic dump files, make sure to save the segment within five minutes. If five
minutes pass before exporting the next segment, the panic dump export fails. After finishing saving
each segment, save the following segment immediately.
 If the panic dump file is segmented, download and save the next segment (save all the segmented
files).
160
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Step 6.
P2X0-1270-13ENZ0