Modify Thin Provisioning Volume Threshold - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 3 Volume Management
3.7 TPV Management
3.7.2

Modify Thin Provisioning Volume Threshold

This function changes the threshold for monitoring the usage ratio of Thin Provisioning Volume (TPV). The
usage ratio is the ratio of used capacity (physically allocated capacity) to the logical TPV capacity.
• This function changes the threshold of a TPV that is created by using the
• The same threshold can be applied for multiple TPVs in a single operation.
For details on the parameters for this function, refer to
(page 798).
For the factory default settings for this function, refer to
Threshold" (page
The procedure to change the threshold of Thin Provisioning Volume is as follows:
Procedure
1
Select the TPV for which the threshold is to be changed (multiple selections can be made)
and click [Modify TPV Threshold] in [Action].
2
Specify the new threshold.
The main setting item is as follows.
●
Threshold Setting
• New Threshold
3
Click the [Modify] button.
 A confirmation screen appears.
4
Click the [OK] button.
 Setting of the TPV threshold starts.
989).
288
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"3.1 Create Volume" (page
"A.3.5 Modify Thin Provisioning Volume Threshold"
"Appendix B Modify Thin Provisioning Volume
253).
P2X0-1270-13ENZ0