Fujitsu ETERNUS DX60 S3 User Manual page 260

Chapter 3 Volume Management
3.1 Create Volume
• Setting items when "Volume No." is specified
Setting items
New Volume
Manual
Setting or
Manual
Setting
(Volume
Information)
Manual
Setting
(Select RAID
Group
Information)
✓: Required settings
Blank: Settings that are not required
-: N/A
*1: The following items are advanced settings. It is not necessary to change the default setting for normal use.
•
"Wide Stripe Size" and "Concatenation Order" under the "Manual Setting (Volume Information)" field.
•
"Stripe Depth" under the "Manual Setting (Select RAID Group Information)" field.
*2: The NAS FS block size cannot be specified for TPV.
*3: The number of volumes cannot be specified for NAS.
Standard
Name ✓
Capacity ✓
Type ✓
Capacity of
source
volume
only SDV
Allocation
NAS FS Block
Size
RAID Group/
Manual
TPP Selection
Data Integrity ✓
Use all
Largest Free
Space
Volume No. ✓
Encryption by
CM
✓
Number of
"1"
Volumes
(fixed)
(RAID group)
Number of
Volumes –
(TPP)
Number of
Volumes –
(WSV)
Drive Type –
RAID Level –
Number of
Member –
Drives
260
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
TPV SDV SDPV
NAS
✓ ✓ ✓
✓ ✓
✓ ✓ ✓
✓
✓
✓ (*2)
✓ ✓ ✓
– ✓ ✓
"1" "1"
–
(fixed) (fixed)
"1"
(fixed) – –
(*3)
– – –
– – –
– – –
– – –
WSV (*1) Remarks
✓
✓
✓
✓
"Off" (fixed) when
the encryption
mode is disabled
✓ or when the drive
type is "Online
SED", "Nearline
SED", or "SSD SED"
–
–
"1"
(fixed)
✓
✓
✓
P2X0-1270-13ENZ0