Fujitsu ETERNUS DX60 S3 User Manual page 1005

Appendix B Factory Default List
B.4 RAID Group Management
■ Expand RAID Group
Screen
Manual Setting
■ Modify RAID Group Parameters
Screen
Parameters Setting
Advanced Settings
■ Assign Eco-mode Schedule (RAID Group)
Screen
Eco-mode Schedule Settings
■ Set Key Group (RAID Group)
Screen
Key Group Setting
Setting item
RAID Level after expand
Setting item
Rebuild Priority
DCMF
Drive Access Priority
Drive Tuning Parameter Setting
Throttle
Ordered Cut
Setting item
Eco-mode Action
Setting item
Key Group
1005
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Default value
High Performance (RAID1+0)
Default value
•
When the RAID level is not "High Reliability
(RAID6-FR)"
Low
•
When the RAID level is "High Reliability
(RAID6-FR)"
High
1
Response
Enable
100%
400
Default value
•
When no Eco-mode schedules are registered
Drive always on
•
When Eco-mode schedules are registered
Do not change
Default value
Enable
P2X0-1270-13ENZ0