Fujitsu ETERNUS DX60 S3 User Manual page 309

Chapter 3 Volume Management
3.9 Start RAID Migration
The procedure to start a migration is as follows:
Procedure
1
Select the volume that to be migrated and click [Start RAID Migration] in [Action].
If a volume that is used for the Virtual Volume function (except "$VVOL_META") is selected, [Start RAID
Migration] cannot be clicked.
2
Select "Wide Striping Volume" for "Migration Destination". Input the volume capacity, the
encryption status, the detailed information of volumes, and the selection information for
the RAID groups.
The main setting items are as follows.
●
Setting Volume
• Volume Capacity
• Encryption
●
Wide Striping Volume Setting
WSVs are created by concatenating volumes that are the same size in multiple RAID groups. Input
the volume information for the migration destination WSV and the selection information for the
RAID groups, and then specify the RAID groups that are to be concatenated. For detailed informa-
tion about creating WSVs, refer to
When changing the number of concatenations for a WSV, specifying the existing RAID groups is
required. For details, refer to "Remarks" in
(page
"Creating WSV type volumes" (page
308).
309
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
255).
"When the migration destination volume is "WSV""
P2X0-1270-13ENZ0