Fujitsu ETERNUS DX60 S3 User Manual page 216

Chapter 1 System Management
1.15 Firmware Management
- The system message "Currently Network Configuration is set to factory default." is displayed in the
system message field (online update is not available) (*1)
*1: The network environment settings must be performed. Refer to
97).
- REC sessions in the following conditions exist (online update is not available)
• The blocked copy path is being used and the session status of this path is not "
Error Suspend"
• The mirror status of the REC buffer that is being used is "Recovering" and the session status is not
"
- REC sessions in which status is not "
available)
• The following conditions must be satisfied when applying a controller firmware that is older than the
current one.
- To apply the older controller firmware, the current controller firmware for the ETERNUS DX must be
V10L4x or later.
- The functions that were provided by the newer controller firmware must not be used.
If these functions are used, delete all the related data.
- The controller firmware that is to be applied must not be V10L2x or earlier (online update is not
available).
• Application of an older controller firmware may not be possible depending on the customer's
environment that does not allow the controller firmware to be applied.
If the application date is specified, the application schedule for the controller firmware can be deleted. Refer
to "1.15.2 Delete Controller Firmware Schedule" (page 224)
For details on the parameters for this function, refer to
For the factory default settings for this function, refer to
The procedure to apply controller firmware is as follows:
Procedure
1
Click [Apply Firmware] in [Action].
Suspend" or " Error Suspend"
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"1.8.1 Setup Network Environment" (page
Suspend" or " Error Suspend" exist (offline update is not
for details.
"A.1.13.1 Apply Controller Firmware" (page
"Appendix B Apply Controller Firmware" (page
216
Suspend" or "
778).
987).
P2X0-1270-13ENZ0