Appendix A Parameter List
A.4 Connectivity Management
•
SMB Encryption of Data Access
Description
Input condition/
Display contents
•
If a client does not support SMB3.0 or SMB3.1, accessing a shared folder where "Enable" is selected for "SMB
Encryption of Data Access" is not available.
•
Note that the system performance may be reduced when "Enable" is selected for this item.
•
If this setting is changed for existing shared folders, sessions that have access to relevant shared folders are
temporarily disconnected. However, if sessions that have already been accessing shared folders exist, the
ETERNUS DX waits for these sessions to complete.
•
Access Based Enumeration
Description
Input condition/
Display contents
If this setting is changed for existing shared folders, sessions that have access to relevant shared folders are
temporarily disconnected.
When performing SMB encryption for data while accessing the shared folder, select
"Enable". When not encrypting, select "Disable".
This setting becomes available when the protocol is "CIFS" or "CIFS/NFS".
•
Enable
•
Disable
To hide the shared folders and directories that cannot be accessed according to the
access control list (ACL function), select "Enable". To display inaccessible shared folders
and directories, select "Disable".
This setting becomes available when the protocol is "CIFS" or "CIFS/NFS".
•
Enable
•
Disable
888
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0