Fujitsu ETERNUS DX60 S3 User Manual page 56

Chapter 1 System Management
1.4 System Management
■ For the other models
 The [Extreme Cache Pool Memory Size Settings] screen appears.
4
Select SSDs from the list or the installation image to configure an EXCP.
When SSD-Ms with an interface speed of 12Gbit/s are installed in a high-density drive enclosure, the
SSDs operate at 6Gbit/s because the interface speed of the high-density drive enclosure is 6Gbit/s.
■ Select SSDs from the list
Click the [Tabular] tab to select SSDs from the list.
For the ETERNUS DX8700 S3/DX8900 S3, only unused SSDs in the DE that is connected to the CE with
the CM where the EXCP memory size is to be set are displayed. For the other models, unused SSDs in
the ETERNUS DX are displayed.
The main setting items are as follows.
• Checkbox to select drives
56
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0