Appendix A Parameter List
A.4 Connectivity Management
•
Group
Description
Input condition/
Display contents
•
SMB Encryption of Data Access
Description
Input condition/
Display contents
•
If a client does not support SMB3.0 or SMB3.1, accessing a shared folder where "Enable" is selected for "SMB
Encryption of Data Access" is not available.
•
Note that the system performance may be reduced when "Enable" is selected for this item.
•
Access Based Enumeration
Description
Input condition/
Display contents
Input the group of the shared folder.
Up to 255 alphanumeric characters and symbols (0x20 - 0x7E in the US-ASCII format)
Note that the following symbols and characters cannot be used.
•
Question mark (0x3F) and backslash (0x5C)
•
The following reserved words
"shareuser$", "bin", "daemon", "sys", "adm", "tty", "disk", "lp", "mem", "kmem",
"wheel", "mail", "uucp", "man", "games", "gopher", "video", "dip", "ftp", "lock", "audio",
"nobody", "users", "utmp", "utempter", "floppy", "vcsa", "rpc", "nscd", "cdrom", "tape",
"dialout", "ntp", "saslauth", "mailnull", "smmsp", "rpcuser", "nfsnobody", "sshd",
"ldap", "tcpdump", and "oprofile"
When performing SMB encryption for data while accessing the shared folder, select
"Enable". When not encrypting, select "Disable".
This setting becomes available when the protocol is "CIFS" or "CIFS/NFS".
•
Enable
•
Disable
To hide the shared folders and directories that cannot be accessed according to the
access control list (ACL function), select "Enable". To display inaccessible shared folders
and directories, select "Disable".
This setting becomes available when the protocol is "CIFS" or "CIFS/NFS".
•
Enable
•
Disable
884
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0