Fujitsu ETERNUS DX60 S3 User Manual page 390

Chapter 4 Connectivity Management
4.2 Host Group Management
(3)
Manually specify the WWN of the host to be added.
The main setting item is as follows.
●
Host Setting
• WWN
If an error screen appears under the following conditions, check the parameter settings.
•
•
(4)
Click the [OK] button
 Returns to the [Manual Input] screen.
(5)
Repeat
If an error screen appears under the following conditions, check the parameter settings.
• The "Host Group Name" is not entered
• The "Host Group Name" does not satisfy the input conditions
• The "Host Group Name" overlaps with an existing host group name (Host group names cannot
overlap with any other host group names, irrespective of the interface types.)
• The several FC hosts with the same WWNs have been registered
• A host cannot recognize some LUNs
• No hosts are registered in the host group, or more than eight hosts (or more than 64 for the
ETERNUS DX8700 S3/DX8900 S3) are registered
• The total number of hosts has exceeded the maximum number for the ETERNUS DX
The "WWN" is not entered
The "WWN" does not satisfy the input conditions
Step (2) through Step (4)
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
to set more WWNs.
390
P2X0-1270-13ENZ0