Fujitsu ETERNUS DX60 S3 User Manual page 716

Appendix A Parameter List
A.1 System Management
A.1.7.8 Setup SNMP Agent Trap
For details about this function, refer to
For the factory default settings for this function, refer to
●
Setup SNMP Agent Trap
• Manager No.
Description
Input condition/
Display contents
• SNMP Version
Description
Input condition/
Display contents
• Community Name
Description
Input condition/
Display contents
• User Name
Description
Input condition/
Display contents
• Port No.
Description
Input condition/
Display contents
"1.8.8 Setup SNMP Agent Trap" (page
Select a manager number.
The management number of the SNMP Agent Manager, which has been registered in
"1.8.4 Setup SNMP Manager" (page
Manager01 - Manager10
Select the trap SNMP version.
•
v1
•
v2c
•
v3
Select the community name used when sending a trap.
The community name, which has been registered in
Community" (page 120), is displayed as an option.
If the SNMP version is "v1" or "v2c", the "Community Name" must be specified.
Community names that are registered by using the [Setup SNMP Agent Community]
function
Select the user name used when sending a trap.
The user name, which has been registered in
is displayed as an option.
If the SNMP version is "v3", the "User Name" must be specified.
User names that are registered by using the [Setup SNMP Agent User] function
Input the port number of the trap destination.
When changing a port number, input a unique port number.
1 - 65535
716
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
123).
"Appendix B Setup SNMP Agent Trap" (page
113), is displayed as an option.
"1.8.7 Setup SNMP Agent
"1.8.6 Setup SNMP Agent User" (page
981).
117),
P2X0-1270-13ENZ0