Backup Configuration - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 System Management
1.5 Utility Management
2
Click the [Restart] button.
 A confirmation screen appears.
3
Click the [OK] button.
 The ETERNUS DX shuts down after 30 seconds. After shutdown, the ETERNUS DX restarts.
1.5.2

Backup Configuration

This function backs up the configuration definition data to the Bootup and Utility Device (BUD) in the CM. Up
to four generations of configuration definition data can be stored.
This function cannot be used under the following conditions:
• When no configuration definition data file is selected
• When no data exists in the configuration definition data file
• When an error exists with the configuration definition data file size
• When an error exists in the configuration definition data file
For details on the parameters for this function, refer to
For the factory default settings for this function, refer to
The procedure to backup configuration definition file is as follows:
Procedure
1
Click [Backup Configuration] in [Action].
66
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"A.1.4.1 Backup Configuration" (page
"Appendix B Backup Configuration" (page
End of procedure
690).
975).
P2X0-1270-13ENZ0