A.6.3 Rename Thin Provisioning Pool - Fujitsu ETERNUS DX60 S3 User Manual

Appendix A Parameter List
A.6 Thin Provisioning Management
A.6.3 Rename Thin Provisioning Pool
For details about this function, refer to
For the factory default settings for this function, refer to
1007).
●
Rename Setting
• Name
Description
Input condition/
Display contents
• Start of Suffix
Description
Input condition/
Display contents
A.6.4 Expand Thin Provisioning Pool
For details about this function, refer to
For the factory default settings for this function, refer to
1007).
●
Automatic Setting
• Total Capacity after expand
Description
Input condition/
Display contents
"6.4 Rename Thin Provisioning Pool" (page
Input a new TPP name.
When changing the name of a single TPP, an existing TPP name cannot be used.
•
Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
•
Spaces
Input the starting number of the suffix that is to be added to the new TPP name.
When changing multiple TPP names, the suffix number is added to the TPP names with
consecutive numbers in ascending order starting with the entered suffix number. Refer
to "Naming conventions for renaming volumes" (page 1052)
When changing only one TPP name, the "Start of Suffix" field is not displayed.
•
Numeric characters (0 - 99999)
•
Decimal number
•
1 - 5 digits
"6.5 Expand Thin Provisioning Pool" (page
Input the total capacity of the TPP after expansion and select either "TB" or "GB" for the
capacity.
Drives are automatically selected according to the existing RAID group specifications,
and the TPP capacity is expanded to the entered value or higher. For the maximum
capacity of TPP, refer to "The maximum number of pools and maximum pool capacity for
each model" (page 559).
•
Numeric characters
•
GB/TB
931
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
569).
"Appendix B Rename Thin Provisioning Pool" (page
for details.
571).
"Appendix B Expand Thin Provisioning Pool" (page
P2X0-1270-13ENZ0