Fujitsu ETERNUS DX60 S3 User Manual page 872

Appendix A Parameter List
A.4 Connectivity Management
• TPG Referrals Mode
Description
Input condition/
Display contents
•
The TPG Referrals function is performed when "Enable" is selected and all of the following conditions apply:
-
The ETERNUS Multipath Driver supports the TPG Referrals function
-
"Enable (Default)" is selected for "TPGS Mode"
•
This parameter is available for Standard, WSV, TPV, FTV, and Standard (LUN concatenation) type volumes.
●
Inquiry Command Settings
• Peripheral Device Type (Peripheral Device Addressing)
Description
Input condition/
Display contents
This parameter can only be specified when the LUN addressing setting is "Peripheral device addressing (Default)".
• Peripheral Device Type (Flat Space Addressing)
Description
Input condition/
Display contents
This parameter can only be specified when the LUN addressing setting is "Flat space addressing".
• SCSI Version
Description
Input condition/
Display contents
Select "Enable" or "Disable (Default)" for the TPGS referrals setting.
The TPG Referrals function determines the priority path for each block when accessing
volumes via the ETERNUS Multipath Driver in order to prevent cross access.
•
Enable
•
Disable (Default)
If the LUN addressing setting is "Peripheral device addressing (Default)", select a
Peripheral Device type for unconnected LUNs.
•
No Device Type (3Fh) (Default)
•
Not Supported (7Fh)
•
Not Connected (20h)
When the LUN addressing setting is "Flat space addressing", select the Peripheral Device
type for LUN0.
•
No Device Type (3Fh) (Default)
•
Controller Device (0Ch)
Select the version of the SCSI specification that is installed in the ETERNUS DX.
•
Version6 (Default)
•
Version5
•
Version4
•
Version3
872
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0