Fujitsu ETERNUS DX60 S3 User Manual page 719

Appendix A Parameter List
A.1 System Management
• Authentication Method
Description
Input condition/
Display contents
• User Name
Description
Input condition/
Display contents
• Password
Description
Input condition/
Display contents
●
Advanced Settings
• [Change following Timing Parameter items] checkbox
Description
Input condition/
Display contents
• Connection Timeout
Description
Input condition/
Display contents
• Response Timeout
Description
Input condition/
Display contents
• Maximum Retries
Description
Input condition/
Display contents
If "AUTH SMTP" is selected for "SMTP Authentication Information", select the
authentication method.
•
Automatic
•
CRAM-MD5
•
PLAIN
•
LOGIN
When "AUTH SMTP" is selected for "SMTP requires authentication", input the sender user
name.
Up to 32 alphanumeric characters and symbols
When "AUTH SMTP" is selected for "SMTP requires authentication", input the sender
password.
Up to 64 alphanumeric characters and symbols
To change the timing parameters, select the checkbox.
•
Selected
•
Cleared
Input the timeout limit for SMTP connection.
1 - 300 sec.
Input the timeout limit for SMTP response.
1 - 300 sec.
Specify the maximum retry count.
0 - 5 count
719
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0