Fujitsu ETERNUS DX60 S3 User Manual page 757

Appendix A Parameter List
A.1 System Management
A.1.10.5 Modify Key Group
For details about this function, refer to
●
Key Group Setting
• Name
Description
Input condition/
Display contents
Do not change the key group name after the key status changes to "Normal". The key status can be checked on the
[Key Group] screen. Refer to "Key Group" in "ETERNUS Web GUI User's Guide (Operation)" for details.
• Storage System Group Name
Description
Input condition/
Display contents
Do not change the storage system group name after the key status changes to "Normal". The key status can be
checked on the [Key Group] screen. Refer to "Key Group" in "ETERNUS Web GUI User's Guide (Operation)" for details.
"1.11.7 Modify Key Group" (page
Input a key group name.
The key group name corresponds to "Serial Number", which is managed in the key server.
•
Alphanumeric characters
•
Symbols (underscore "_")
•
The first letter must be an alphabetic character
•
Up to 32 characters
Input the storage group name.
The storage system group combines the key management device (Key Management
Machine) name that is managed by the user with the key groups. The storage system
group name corresponds to "Storage Group Name", which is managed in the key server.
•
Alphanumeric characters
•
Symbols (underscore "_")
•
The first letter must be an alphabetic character
•
Up to 16 digits
757
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
174).
P2X0-1270-13ENZ0