Key Management; Setup Key Management Machine Name - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 System Management

1.11 Key Management

1.11 Key Management
This section describes key management.
The ETERNUS DX60 S3 does not support the key management functions.
In this section, the SED authentication key is referred to as "key".
Key management provides the following functions:

• Setup Key Management Machine Name

• Add Key Server
• Delete Key Server
• Modify Key Server
• Create Key Group
• Delete Key Group
• Modify Key Group
• Update SED Authentication Key
• Import SSL/KMIP Certificate
1.11.1 Setup Key Management Machine Name
This function specifies the name of the key management device (Key Management Machine).
The key management device name is used for the device that is to be used to connect to the key server.
The key management device name cannot be specified when a common key (*1) is not registered. Refer to
"1.4.7 Register SED Authentication Key" (page 47)
*1: The common key for SEDs that are managed in the ETERNUS DX S3 series.
For details on the parameters for this function, refer to
(page 751).
The procedure to set the key management device name is as follows:
Procedure
1
Click [Setup Key Machine Name] in [Action].
for details.
166
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"A.1.10.1 Setup Key Management Machine Name"
P2X0-1270-13ENZ0