Download  Print this page

Advertisement

P3AM-9002-01ENZ0
FUJITSU Storage
ETERNUS DX60 S3
Disk storage system
Configuration Guide (Basic)

Advertisement

   Related Manuals for Fujitsu ETERNUS DX60 S3

   Summary of Contents for Fujitsu ETERNUS DX60 S3

  • Page 1 P3AM-9002-01ENZ0 FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
  • Page 2 This page is intentionally left blank.
  • Page 3: About This Manual

    Preface Fujitsu would like to thank you for purchasing our FUJITSU Storage ETERNUS DX60 S3 Disk storage system (hereinafter referred to as ETERNUS DX). The ETERNUS DX is designed to be connected to Fujitsu servers (Fujitsu M10, PRIMEQUEST, or PRIMERGY) or non-Fujitsu servers.
  • Page 4: Naming Conventions

    Windows Server 2008 R2 for Itanium-Based Systems ® ® Microsoft Windows Server 2008 HPC Edition ® ® Microsoft Windows Server 2008 R2 HPC Edition FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 5 ■ Abbreviations Used in This Manual • "ETERNUS DX" refers to the FUJITSU Storage ETERNUS DX60 S3 Disk storage system. "CA" refers to a host interface module that is used in an ETERNUS DX to connect to a server. •...
  • Page 6 The black "Must Do..." circle indicates actions that must be taken. The required ac- tion is both illustrated inside the black disk and written above it (e.g. Unplug). FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 7 - Be careful that no liquid seeps into the ETERNUS DX when using cleaners, etc. - Do not use alcohol or other solvents to clean the ETERNUS DX. Warning layout ribbon FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 8 • Manufacturer’s label The model name and the serial number are listed. Device ID label The model name and the serial number are listed. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 9 • Manufacturer's label The model name and the serial number are listed. Device ID label The model name and the serial number are listed. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 10: Drive Enclosures

    Preface Drive Enclosures • 3.5" type drive enclosure FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 11 Information such as the model name and serial number is indicated. • Power distribution unit (AC200-240V, 2U) Manufacturer’s label Information such as the model name and serial number is indicated. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 12: Table Of Contents

    3.4 LAN Connection Preparation for Operation Management............. 43 3.4.1 Completing and Attaching the Network Settings Label..................43 3.4.2 LAN Related Specifications..........................44 Chapter 4 Connecting Cables 4.1 Host Interface Cable Connection....................46 FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 13 6.3 Remote Support Setup........................92 6.3.1 Remote Support (by AIS Connect) Setup ......................93 6.3.2 Remote Support (by REMCS) Setup ........................94 6.4 Audit Log Setup..........................96 FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 14 10.2 RAID Group Check........................148 10.3 Volume Check........................... 148 10.4 Checking Copy Sessions ......................149 10.5 Checking LUNs.......................... 150 10.6 Powering Off ..........................150 FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 15 Chapter 11 Solution Configuration 11.1 Green ............................152 11.2 Virtualization Platform ......................154 11.2.1 Oracle VM Linkage ............................154 11.2.2 VMware Linkage .............................156 11.2.3 Microsoft Linkage ............................157 FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 16 Figure 11.2 Solution — Virtualization Platform (Oracle VM Linkage)................154 Figure 11.3 Solution — Virtualization Platform (VMware Linkage)................156 Figure 11.4 Solution — Virtualization Platform (Microsoft Linkage)................157 FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 17 Operation Volume Creation ........................73 Table 7.1 ETERNUS DX Operation According to the Settings of the Auto Power Function and the Power Resume Function ..............................101 FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 18: Chapter 1 Component Names

    This section provides the names of the components in the front of a controller enclosure. ■ 2.5" Type Figure 1.1 Front View of a 2.5" Type Controller Enclosure Operation panel 2.5" drive Flange cover FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 19: Rear

    Cover PWC port Drive interface (OUT) port LAN (RMT) port LAN (MNT) port Host interface (CA#0) Power supply unit (PSU#0) Power supply unit (PSU#1) FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 20: Figure 1.4 Rear View Of A Controller Enclosure (when Two Controllers Are Installed)

    Controller (CM#1) PWC port Drive interface (OUT) port LAN (RMT) port LAN (MNT) port Host interface (CA#0) Power supply unit (PSU#0) Power supply unit (PSU#1) FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 21: Drive Enclosure (3.5" Type)

    Figure 1.6 Rear View of a Drive Enclosure (When Only One I/O Module is Installed) I/O module (IOM#0) Cover Drive interface (IN) port Drive interface (OUT) port Power supply unit (PSU#0) FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 22: Power Distribution Units (for Regions Other Than Emea&i)

    1.3.1.1 Power Distribution Unit (AC200-240V, 1U, 4 Outlets) Figure 1.8 Power Distribution Unit (AC200-240V, 1U, 4 Outlets) Main line switch Outlet (OUTPUT) Inlet (INPUT) FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 23: Power Distribution Units (2u)

    Power Distribution Unit (AC200-240V, 2U, 16 Outlets) There are 16 outlets. Figure 1.10 Power Distribution Unit (AC200-240V, 2U, 16 Outlets) Main line switch Outlet (OUTPUT) FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 24: Chapter 2 Rack Installation

    Contact your sales representative or maintenance engineer if drives that are instal- led by default need to be uninstalled or moved to another slot. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 25: Installing Power Distribution Unit (for Regions Other Than Emea&i)

    This section describes how to install the power distribution unit in a rack. Do Not Do not connect any devices other than the ETERNUS DX to the power distribution • unit. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 26: Installing Power Distribution Unit (1u)

    3rd hole 3rd hole (M6 screw) (M6 screw) Power distribution unit 1st hole 1st hole (M6 screw) (M6 screw) Power distribution unit base line Bracket FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 27 The blank panel should be attached at the same height as the power distribution unit. Blank panel (Rack pillar: front) Power distribution unit (Rack pillar: rear) FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 28: Installing Power Distribution Unit (2u)

    Attachment procedure Clip the M5 cage nut tabs into the desired hole from the inside. Side view M5 cage nut Rack pillar (square hole) FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 29 The blank panel should be attached at the same height as the power distribution unit. Blank panel Power distribution unit (Rack pillar: front) (Rack pillar: rear) FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 30: Controller Enclosure Installation (for Regions Other Than Emea&i)

    Use the two plates to fasten the rack rails to the front rack pillars. Use the washers to fasten the rack rails to the rear rack pillars. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 31 (M5 screw) (M5 screw) Controller enclosure base line Rack rail Tighten the M4 screws of the rack rails that were slightly unscrewed in Step FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 32 Fasten the controller enclosure in the rack. Use three M5 screws to fasten it in the rack pillar. M5 screw M5 screws Attach the flange cover. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 33: Type Drive Enclosure Installation (for Regions Other Than Emea&i)

    Use the two plates to fasten the rack rails to the front rack pillars. Use the washers to fasten the rack rails to the rear rack pillars. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 34 Failure to do so may cause injury. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 35 Fasten the drive enclosure in the rack. Use four M5 screws to fasten it in the rack pillar. M5 screws M5 screws Attach the flange cover. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 36: Chapter 3 Checking The Configuration Environment

    Server Multipath iSCSI SAN Remote support center LAN for Operation Management SNMP manager PC for Operation Management/ PC for setup Mail server Syslog server FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 37: Server Connection Preparation

    • connected to the ETERNUS DX. If the server is connected, shut down the server, re- move the cable, and then restart the server. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 38: Driver Installation

    To change the installation directory, click the [Browse] button and select the installation directory. To leave the settings unchanged, click the [Next] button. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 39: Iscsi Initiator Parameter Settings

    For the first startup, the dialog box that is shown below appears. If there is no problem with service startup settings, click the [Yes] button. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 40 Chapter 3 Checking the Configuration Environment Server Connection Preparation On the [iSCSI Initiator Properties] screen, click the [Configuration] tab. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 41 To use the default initiator name, also click the [Change] button. This allows you to continue to use this initiator name even after changing the "server name". FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 42: Preparing The Pc Terminal For Setup

    IP address: 192.168.1.2 Subnet mask: 255.255.255.0 Check the settings of the Web browser. For details on the required settings, refer to "Configuration Guide (Web GUI)". FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 43: Lan Connection Preparation For Operation Management

    Enter the IP address for the RMT port of the ETERNUS DX. The RMT port is a LAN port that is used during initial setup and to connect to the remote support center. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 44: Lan Related Specifications

    ¡ (*2) ´ ´ ´ ETERNUS DX Discov- Unique 9686 from − ¡ protocol ¡: Possible / △: Partially possible / ´: Not possible FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 45 The default LAN operation mode is "Auto Negotiation" which allows the ETERNUS DX to automatically recog- nize 1000Base-T/100Base-TX/10Base-T and Full/Half-Duplex connections. However, some devices may re- quire that a fixed communication mode be set. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 46: Chapter 4 Connecting Cables

    This section uses a controller enclosure with two controllers as an example to explain the connection pro- cedure. When one controller is installed, this procedure is only applied to Controller 0 (CM#0). FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 47: Drive Enclosure Connection

    0.75m mini SAS HD cables between enclosures are provided with drive enclosures. The following procedure explains how to connect the mini SAS HD cable between enclosures. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 48 • enclosure. • The connectors on the cable with the "l" symbol are connected to the DI (IN) ports on the drive en- closure. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 49: Power Synchronized Unit Connection

    ETERNUS DX, and required settings. Power Cord Connection Connect the power cords to the ETERNUS DX. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 50: When No Power Distribution Units Are Installed

    Connect the plug at the other end of each power cord to the socket. Connecting two power cords for each enclosure to different two power supply facilities improves the availability of the power supply facilities against failures. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 51: When 1u Power Distribution Unit Is Installed (for Regions Other Than Emea&i)

    Remove the power cord clamp from the power distribution unit. Power cord clamp Power distribution unit FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 52: When 2u Power Distribution Unit Is Installed (for Regions Other Than Emea&i)

    This section explains how to install a 12 outlet type power distribution unit as an example. This installa- tion method can also be applied to a 16 outlet type power distribution unit. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 53 : Connect OUTPUT#0-n of the Power distribution unit to the PSU#0 inlet of the ETERNUS DX. : Connect OUTPUT#1-n of the Power distribution unit to the PSU#1 inlet of the ETERNUS DX. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 54 #0 side and the power distribution unit #1 side to different power sources. AC input cables Power distribution unit#1 Power distribution unit#0 Connect to power outlets. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 55: Chapter 5 General Settings

    Perform the basic settings to use the Advanced Copy function. For details on these settings and performing SnapOPC+, refer to "Chapter 9 Advanced Copy Settings" (page 137). FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 56: Figure 5.1 Example Of Differential Backup Settings With Snapopc

    M : 7th generation Sunday data ETERNUS DX SnapOPC+ By mounting the copy destination volumes, the past data is recognized as drives by the server FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 57: Pc Terminal Connection

    LAN cable (for operation management). For the setup information of the PC terminal, refer to "3.3 Preparing the PC Terminal for Setup" (page 42). FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 58: Powering On

    Make sure all of the main line switches are in the ON position. ● For 1U Figure 5.4 ON Position (Marked "|") of the Main Line Switches on a 1U Power Distribution Unit Main line switch FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 59: Switching On And Off The Psu Switch On The Power Supply Unit

    Power supply unit (PSU#1) AC power is supplied to an enclosure. For the controller enclosure, the POWER LED on the power supply unit blinks green. • FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 60: Powering On

    After power-off, wait for about one minute before turning power on again. • Press the Power switch of the controller enclosure. Power switch The POWER LED ( ) is turned on. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 61: Eternus Web Gui Startup

    To change the language, click the [Option] button and select [English] or [Japanese] in [Language:]. Enter the User ID and Password. User ID: root Password: root (by default) FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 62: Storage Management (initial Setup 1)

    • Setup Network Environment • The procedure for initial setup is shown below. For details on the settings, refer to "Configuration Guide (Web GUI)". FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 63 NUS DX is displayed in the login and operation screens of ETERNUS Web GUI. Set the required items and click the [Next >>] button. A confirmation screen appears. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 64 Click the [Done] button. The [Set Thin Provisioning] screen appears. Thin Provisioning setup Enable or disable the Thin Provisioning function and set the maximum pool capacity. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 65 Advanced Copy license registration Click the [Skip] button to proceed to the [Setup Network Environment] screen. Network environment setup Set the ETERNUS DX environment for network communication. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 66 Click the [OK] button. The network environment setting is applied and the setting completion screen appears. Click the [Finish] button. The [Logout] screen appears. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 67: Lan Cable Connection (for Operation Management)

    When the STP function is necessary for the network configuration: • Disable the STP function of the LAN switch port only for the ETERNUS DX connection or perform the Port- Fast setting. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 68: Firewall Settings

    LAN cable of the RMT port to the network for remote support. Firewall Settings Set the firewall for each service. The settings are required respectively for the MNT port and the RMT port. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 69 Click the [System] tab on the navigation of the ETERNUS Web GUI screen. In [Category], click [Network]. The [Network] screen appears. Select the port to be set. In [Action], click [Setup Firewall]. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 70 In the confirmation screen, click the [OK] button. The firewall settings are applied. Check the setting completion message and click the [Done] button. The screen display returns to the [Network] screen. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 71: Raid Configuration Settings

    600GB SAS disk ´ 5 Operation RAID group (copy Manual RAID5 source) 2TB Nearline SAS disk ´ 3 Backup RAID group (copy des- Manual RAID5 tination) FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 72 Enter the name of the RAID group that is to be registered. Select "Manual" for "Create Mode". Set the required items and click the [Create] button. Name: RG0 Create Mode: Manual RAID Level: High Capacity (RAID5) FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 73: Operation Volume Creation

    When creation is finished, the volume is automatically formatted. After volume creation, Standard and SDV become accessible from the host when host affinity setting is completed. SDPV becomes available when formatting starts after creation. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 74 Then, create SDV and SDPV in the backup RAID group (RG1). For the creation procedure, refer to "5.7.3 Generation Management Volume (SDV) Creation" (page 75) "5.7.4 Copy Data Destination Volume (SDPV) Creation" (page 76). FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 75: Generation Management Volume (sdv) Creation

    *1: Enter the capacity of the copy source volume during creation of SDV. *2: If "7" is specified for the number of volumes, sdv0, sdv1, sdv2, sdv3, sdv4, sdv5, and sdv6 volumes are created. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 76: Copy Data Destination Volume (sdpv) Creation

    71). Figure 5.10 Copy Data Destination Volume (SDPV) Creation Backup RAID group (RG1) Copy data destination volume 500GB sdpv (Snap Data Pool Volume) RAID5(2+1) FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 77 Click the [OK] button. The volume is created and the registration completion screen appears. Click the [Done] button. The screen display returns to the [Volume] screen. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 78: Hot Spare Registration

    This is only available to the specified RAID group (one RAID group). For a RAID group that contains important data, assign "Dedicated Hot Spare" in order to preferentially use the hot spare. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 79 Select the drive that is to be registered as the Global Hot Spare and click [Assign Global HS] in [Action]. A confirmation screen appears. Click the [OK] button. The Global Hot Spare is registered and the registration completion screen appears. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 80 The Dedicated Hot Spare is registered and the registration completion screen appears. Click the [Done] button. The screen display returns to the [Drives] screen. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 81: Chapter 6 Monitoring Settings

    In the [Setting based on Severity] tab screen, select the required items. On the screens that are displayed by clicking each level tab, select the required items. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 82: Various Notification Settings

    IP address and the Allowable IP address (IP address of the monitoring server or the network ad- dress to which the monitoring server belongs) on the [Setup Network Environment] screen of ETERNUS Web GUI. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 83 Select [Enable] for [SNMP Function], set the required items, and click the [Set] button. Select the LAN port that was set up in Step 1 for "LAN Port used for SNMP". A confirmation screen appears. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 84 The SNMP Manager settings are applied. Check the setting completion message and click the [Done] button. The screen display returns to the [Network] screen. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 85 The SNMP community settings are applied. Check the setting completion message and click the [Done] button. The screen display returns to the [Network] screen. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 86 In [Action], click [Setup SNMP Trap]. The [Setup SNMP Agent Trap] screen appears. In the trap list of the [Setup SNMP Agent Trap] screen, click the [Add] button. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 87 Download the MIB file. Download the MIB file that is registered in the ETERNUS DX. In [Action], click [Download MIB File]. The [Download MIB File] screen appears. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 88 Click the [Save] button. The MIB file is saved. Check the setting completion message and click the [Done] button. The screen display returns to the [Network] screen. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 89: E-mail Setup

    Enter the destination e-mail address or addresses for the Destination E-Mail Address fields. Click the [E-Mail Server Settings] tab. The [E-Mail Server Settings] tab screen appears. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 90 This item does not need to be changed from the default value for normal operation. Click the [Set] button to apply the specified settings. A confirmation screen appears. Click the [OK] button. The e-mail notification settings are applied. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 91: Syslog Setup

    To send messages in RFC5424 format to a target Syslog server that supports RFC5424, select "on(RFC5424)". If this is not the case, select "on(RFC3164)". FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 92: Remote Support Setup

    AIS Connect and REMCS cannot be used at the same time. AIS Connect function can only be used when REMCS is not specified or is stopped. When REMCS is used, suspend the REMCS function, and then ena- ble the AIS Connect function. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 93: Remote Support (by Ais Connect) Setup

    (Country Code : Country Name)". Perform the other additional settings that are required. Click the [Set] button. A confirmation screen appears. Click the [OK] button. The AIS Connect settings are applied. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 94: Remote Support (by Remcs) Setup

    In [Category], click [REMCS] in [Remote Support]. The [Support Information] tab screen of the [Remote Support] screen appears. In [Action], click [Setup Remote Support]. The [Setup Remote Support] screen appears. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 95 The connection check result is sent to the e-mail address that is set in "Result notification information". FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 96: Audit Log Setup

    To send messages in RFC5424 format to a target Syslog server that supports RFC5424, select "on (RFC5424)". If this is not the case, select "on (RFC3164)". FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 97: Monitoring Server (snmp Manager) Settings

    Register the file that was downloaded in "Download the MIB file" (Step 6) in "6.2.1 SNMP Trap Setup" (page 82) as the MIB definition file for the monitoring software. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 98: Transmission Test Execution

    The test transmission of the SNMP Trap is performed. Check the test transmission completion message and click the [Done] button. The screen display returns to the [Network] screen. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 99: Send Test Mail

    The [System] screen appears. In [Category], click [Network]. The [Network] screen appears. In [Action], click [Setup E-Mail Notification]. The [Setup E-Mail Notification] screen appears. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 100 Check that the test mail is sent to the e-mail addresses that are set. For details on the event code and message of the test mail, refer to "Message List". FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 101: Chapter 7 Power Control Setup

    Power Resume function is enabled The procedure to enable the Auto Power function and/or the Power Resume function is described below. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 102: Connection Setup For Power Synchronized Unit

    Refer to "Configuration Guide (Power Synchronized Unit)" for the required settings to use power control by connecting power synchronized units to an ETERNUS DX. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 103: Wake On Lan Settings

    "Gateway" and specify the server IP address or the network address in "Allowable IP Address". Click the [Set] button. A confirmation screen appears. Click the [OK] button. The network environment settings are applied. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 104 Power Control Setup Wake On LAN Settings Check the setting completion message and click the [Done] button. The screen display returns to the [System Settings] screen. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 105: Chapter 8 San Connection Settings

    Click the [Connectivity] tab on the navigation of the ETERNUS Web GUI screen. On the [Connectivity] screen, click [Host Response] in [Category]. In [Action], click [Add Host Response]. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 106: Host Affinity Settings

    Host affinity creation For the settings for connection using other interfaces, refer to "Configuration Guide (Web GUI)". Also refer to "Configuration Guide -Server Connection-" as required. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 107 The iSCSI host group is added and the registration completion screen appears. Click the [Done] button. The screen display returns to the [Host Group] screen. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 108 • CHAP Specify [ON] to use unidirectional CHAP authentication or bidirectional CHAP authentication for the target port and [OFF] to use neither of them. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 109 The port parameter is set and the setting completion screen appears. Click the [Done] button. The screen display returns to the [iSCSI Port] screen. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 110 The CA port group is created and the setting completion screen appears. Click the [Done] button. The screen display returns to the [CA Port Group] screen. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 111 Enter the number for the first LUN and number of LUNs to allocate to the LUN group in [LUN Setting], select the number for the first volume to be allocated, and click the [OK] button. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 112 Select the "Host Group", the "CA Port Group", and the "LUN Group" that are to be associated. Click the [Browse] button in [Host Group]. A screen to select the host group appears. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 113 Connection], and click the [Create] button. A confirmation screen appears. Click the [OK] button. The host affinity is created and the registration completion screen appears. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 114: Ca Reset Group Settings

    Set the CA reset group member ports and click the [Modify] button. In the confirmation screen, click the [OK] button. Click the [Done] button to return to the [CA Reset Group] screen. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 115: Server Connection Setup

    After confirming that the ETERNUS DX is in READY status, turn on the server. On the [iSCSI Initiator Properties] screen, click the [Discovery] tab. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 116 8.1) When setting access restrictions, the settings related to CHAP authentication is required. For details on CHAP authentication, refer to "Configuration Guide -Server Connection-". FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 117 To enable mutual authentication, select [Perform mutual authentication]. Click the [OK] button. The screen display returns to the [Discover Target Portal] screen. Click the [OK] button. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 118 On the [iSCSI Initiator Properties] screen, click the [Discovery] tab. Confirm that the specified settings are correctly reflected to [The system will look for Targets on follow- ing portals]. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 119 On the [iSCSI Initiator Properties] screen, click the [Targets] tab. Confirm whether the specified contents in [The system will look for Targets on following portals] have been applied correctly before checking connection. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 120 On the [Advanced Settings] screen, specify the following items under [Connect using] and click the [OK] button. Local adapter: Microsoft iSCSI Initiator Initiator IP: IP address of the server (A in Figure 8.1) FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 121 Target portal IP: IP address of the ETERNUS DX (C in Figure 8.1) Confirm that the [Add this connection to the list of Favorite Targets.] checkbox is selected and click the [OK] button. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 122 Initiator IP: IP address of the server (B in Figure 8.1) Target portal IP: IP address of the ETERNUS DX (D in Figure 8.1) FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 123 Chapter 8 SAN Connection Settings Server Connection Setup Confirm that [Status] of the two targets has changed to [Connected] and click the [OK] button. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 124: Lun Recognition Check

    The following procedure explains how to check LUN using the Windows Device Manager. Open [Device Manager] and expand [Disk drives]. Confirm that the same number of "FUJITSU..." items are displayed as the number of LUNs that are set. If the example is used, eight "FUJITSU..." items are displayed.
  • Page 125 CM#0 CA#0 Port#0 g CAID = 00 CM#1 CA#0 Port#0 g CAID = 02 CM#0 CA#0 Port#1 g CAID = 01 CM#1 CA#0 Port#1 g CAID = 03 FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 126: Disk Partition Settings

    Select the checkbox for eight disks in this example. When Windows Server 2008 Enterprise is used, [Initialize Disk] does not appear. Perform the steps from Step 3 onwards. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 127 Server Connection Setup The LUNs that are set with the ETERNUS DX are recognized as [Offline]. Right-click all the disks displayed as offline, and select [Online]. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 128 SAN Connection Settings Server Connection Setup [Offline] changes to [Not Initialized]. Right-click all the disks to be changed to online, and select [Initialize Disk]. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 129 When the [Initialize Disk] screen appears, confirm that all the disks are selected and click the [OK] but- ton. Confirm that the initialized disks are displayed as [Online]. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 130 The following procedure explains how to set up the operation disk. Select [Disk Management] from [Computer Management]. On the [New Simple Volume Wizard] screen, click the [Next] button. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 131 When [Assign Drive Letter or Path] appears, assign a drive letter and click the [Next] button. Perform the settings as shown below. File system Drive that is to be Volume No. Volume name Type Capacity created NTFS main Standard FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 132 [Format Partition] appears. Click the [Next] button. [Completing the New Simple Volume Wizard] appears. Click the [Finish] button. Check that the specified settings are displayed correctly. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 133 Set up the disk created in [Snap Data Volume]. During volume creation, right-click the disk created in [Snap Data Volume] and select [New Simple Vol- ume]. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 134 Without changing the default settings of [Specify Volume Size], click the [Next] button. Assign a drive letter in [Assign Drive Letter or Path] and click the [Next] button. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 135 *1: The capacity that is displayed in "( )" is the copy source capacity. Select [Do not format this volume], and click the [Next] button. [Completing the New Simple Volume Wizard] appears. Click the [Finish] button. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 136 Step 7 for all the disks created in [Snap Data Volume]. In this case, seven disks are created as [Drive Letter: Assigned, RAW]. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 137: Chapter 9 Advanced Copy Settings

    This mode reduces the effect on host access. Select this mode when using EC and/or OPC during operation. • Very Low Priority This mode operates slower than the Low Priority mode. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 138: Copy Table Size Settings

    It is recommended to set the maximum resolution if the amount of data increase in the copy target area • cannot be estimated. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 139 Copy table size setting starts. In the setting completion screen, click the [Done] button. The screen display returns to the [Setting (Advanced Copy)] screen. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 140: Copy Parameter Settings

    In [Action] on the [Setting] screen, click [Modify Copy Parameters]. Set the required items and click the [Modify] button. In the confirmation screen, click the [OK] button. Copy table size setting starts. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 141: Performing A Copy (snapopc+)

    On the navigation of the ETERNUS Web GUI screen, click the [Advanced Copy] tab. In [Action], click [Start SnapOPC+]. Click the [Browse] button of the copy source volume. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 142 Select the "No.: 0, Name: main" volume. In the same way as the copy source volume, click the [Browse] button of the copy destination volume. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 143 Check the displayed information, and then click the [Start] button. In the confirmation screen, click the [OK] button. The SnapOPC+ session starts. Click the [Done] button to return to the [Advanced Copy] screen. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 144 In this case, the copy source volume number is "0" and the copy destination volume numbers are from "1" through to "7". Open [Disk Management] from [Computer Management]. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 145 Check if the file that was created in Step 8 "■ Operation Disk Settings" (page 130) "8.2.3.2 Disk Settings" (page 130) is displayed for the copy source drive. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 146 Step 15 are displayed. Old data can be restored by simply copying and pasting the data files that are to be restored from the server. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 147: Chapter 10 System Status Check

    NUS DX. Check the status of each component on the [Storage] screen. If there is a component in Warning or Error status, contact your sales representative or maintenance engi- neer. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 148: Raid Group Check

    In the [Volume (Basic Information)] screen that appears, select which volume to check the informa- tion for and click the No. or name of this volume. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 149: Checking Copy Sessions

    To display the [Advanced Copy] screen, click the [Advanced Copy] tab on the navigation of the ETERNUS Web GUI screen and click the number of sessions in [SnapOPC+ Sessions]. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 150: Checking Luns

    This section explains how to use the Power switch and power synchronization unit to turn off the ETERNUS For other procedures, refer to the related manuals. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 151 The POWER LED ( ) is turned off. ■ When a Power Synchronized Unit is Used If the server is turned off, the ETERNUS DX is also turned off. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 152: Chapter 11 Solution Configuration

    FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 153: Figure 11.1 Solution - Green

    Perform the following settings with the operation management server (ETERNUS SF Storage Cruiser) or ETER- NUS Web GUI: Eco-mode setup • Enable the Eco-mode for the ETERNUS DX. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 154: Virtualization Platform

    Oracle VM Manager ETERNUS ETERNUS Oracle VM Storage Oracle VM Storage Connect Plug-in Connect Plug-in Administrator Management server Business server Business server ETERNUS DX FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 155: Configuration Procedure

    Discover a SAN server with Oracle VM Manager and register the ETERNUS DX. For details on operating Ora- cle VM Manager, refer to "Oracle VM User's Guide". FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED...
  • Page 156: Vmware Linkage

    Enable SSH connections in the firewall settings of the network settings in ETERNUS Web GUI. For mode details on the settings for ETERNUS vCenter Plug-in, refer to "ETERNUS vCenter Plug-in User's Guide". VASA Provider FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 157: Microsoft Linkage

    Figure 11.4 Solution — Virtualization Platform (Microsoft Linkage) SCVMM 2012 management environment SCVMM 2012 Hyper-V Hyper-V management console SMI-S Management server Administrator ETERNUS DX FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 158 Create ODX volumes after enabling the ODX settings for the Advanced Copy function in the ETERNUS DX with ETERNUS Web GUI. For details on the SCVMM2012 settings, refer to the manual of the SCVMM2012. FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic) Copyright 2014 FUJITSU LIMITED P3AM-9002-01ENZ0...
  • Page 159 However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual. Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information •...

Comments to this Manuals

Symbols: 0
Latest comments: