Fujitsu ETERNUS DX60 S3 User Manual page 827

Appendix A Parameter List
A.4 Connectivity Management
• CHAP User ID
Description
Input condition/
Display contents
• Change CHAP Password
Description
Input condition/
Display contents
• CHAP Password
Description
Input condition/
Display contents
• Confirm CHAP Password
Description
Input condition/
Display contents
The user ID of the member host, for which CHAP Authentication will be used, is
displayed.
To use the CHAP Authentication on the iSCSI host to be added, select the checkbox of the
iSCSI host, and enter the user ID. It is not necessary to specify this item if the CHAP
Authentication is not used.
If the iSCSI host has already been registered in the ETERNUS DX, the user ID is displayed.
Make sure to set the user name and password together.
•
Up to 255 alphanumeric characters and symbols (except "," (comma) and "?")
•
Spaces
To register or change the CHAP Authentication password, select the checkbox.
The checkbox can be selected only when the iSCSI host has been selected.
Checkbox
•
Selected
•
Cleared
The password for the member host, on which the CHAP Authentication will be used, is
displayed with "*".
To use the CHAP Authentication on the iSCSI host to be added, enter the password.
It is not necessary to specify this item if the CHAP Authentication is not used.
The password can be entered only when the iSCSI host has been selected, and the
"Change CHAP Password" checkbox has been selected.
Make sure to set the user name and password together.
•
12 - 100 alphanumeric characters and symbols (except "," (comma) and "?")
•
Spaces
The confirmation password for the member host, on which the CHAP Authentication will
be used, is displayed with "*".
To use the CHAP Authentication on the iSCSI host to be added, re-enter the password for
confirmation. It is not necessary to specify this item if the CHAP Authentication is not
used.
The password can be entered only when the iSCSI host has been selected, and the
"Change CHAP Password" checkbox has been selected.
•
12 - 100 alphanumeric characters and symbols (except "," (comma) and "?")
•
Spaces
827
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0