Fujitsu ETERNUS DX60 S3 User Manual page 669

Appendix A Parameter List
A.1 System Management
• Time Zone (time difference setting)
Description
Input condition/
Display contents
●
Daylight Saving Time Settings
• Daylight Saving Time
Description
Input condition/
Display contents
• Range (By day of the week)
Description
Input condition/
Display contents
• Range(by Date)
Description
Input condition/
Display contents
●
NTP Settings
• Synchronize with NTP Server
Description
Input condition/
Display contents
When selecting "Manually" in the time zone field, specify the time difference from GMT.
•
Time difference
Select "+" or "-".
•
Hour
00 - 12
•
Minute
00, 15, 30, 45
Select whether to enable or disable the Daylight Saving Time.
•
Enable
•
Disable
If Daylight Saving Time is enabled, and "by day of the week" is selected for the range,
specify the start day, end day, and start time and end time.
•
Start day and end day (Month: 01 - 12 Week: 1st - 4th week and the last week of
month Day: Monday - Sunday)
•
Start time and end time Hour (00 - 23)
If Daylight Saving Time is enabled, and "by Date" is selected for the range, specify the
start date, end date, and start time and end time.
•
Start date and end date (Month: 01 - 12 Day: 01 - 31 and the Last Date)
•
Start time and end time Hour (00 - 23)
When performing the time synchronization with the NTP server, select "Enable". If the
time synchronization is not used, select "Disable".
•
Enable
•
Disable
669
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0