Fujitsu ETERNUS DX60 S3 User Manual page 830

Appendix A Parameter List
A.4 Connectivity Management
■ When registering a host by manually specifying the host
●
Host Setting
• WWN
Description
Input condition/
Display contents
For setting items, refer to
(page 829).
A.4.2.8 Add iSCSI Host
For details about this function, refer to
For the factory default settings for this function, refer to
■
When registering a host by selecting from the host list
●
Host Setting
• Checkbox to select a host
Description
Input condition/
Display contents
•
If the iSNS server has not been configured in
cannot be automatically acquired.
•
The following restrictions in the environment that is described below apply for the automatic acquirement of
host information (*1) even when the iSNS server is specified.
*1:
-
When one of the following OSs is used and there are multiple hosts that have the same iSCSI name but
different IP addresses, only the information of one host can be acquired.
•
•
•
•
-
When the host OS is Oracle Solaris 11, "IP Version" and "IP Address" cannot be acquired.
•
The following items can be specified only for the iSCSI hosts that are selected by checkboxes; "Name", "Host
Response", "IP Version", "IP Address", "Alias Name", "CHAP User ID", "CHAP Password", and "Confirm CHAP
Password".
Input the WWN for the FC host.
•
Hexadecimal numbers (0 - 9, A - F, a - f)
•
16 digits ("F (f)" or "0" used in entire 16 digits are not allowed)
"Host Setting" (page 829)
"4.2.10 Add iSCSI Host" (page
Select the checkbox of the iSCSI host that is to be registered in the ETERNUS DX.
Checkbox
•
Selected
•
Cleared
"iSCSI Name", "IP Version", "IP Address", and "Alias Name"
Windows Server 2003
Windows Server 2008
Windows Server 2008 R2
Oracle Solaris 10
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
in "When registering a host by selecting from the host list"
410).
"Appendix B Add iSCSI Host" (page
"4.3.8 Modify iSCSI Port Parameters" (page
830
993).
446), the iSCSI host
P2X0-1270-13ENZ0