Fujitsu ETERNUS DX60 S3 User Manual page 153

Chapter 1 System Management
1.9 Event/Dump Management
7
Click the [Finish] button to return to the [Event/Dump] screen.
 Exporting log has been completed.
When exporting the log is complete, make sure to export a panic dump.
■ For a Unified Storage environment
The procedure to export logs in the Unified Storage environment is as follows:
In a Unified Storage environment, when log files are exported while the ETERNUS DX is in a high-load state,
an error may occur due to a timeout. If an error occurs and exporting fails, perform the log export again in a
low-load state.
Procedure
1
Click [Export/Delete Log] in [Action].
2
Export the storage system log.
2-1
Set the detailed information for exporting a log.
For setting items, refer to Step 2 in For a SAN
153
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
environment.
End of procedure
P2X0-1270-13ENZ0