Create Key Group - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 System Management
1.11 Key Management
1.11.5

Create Key Group

This function creates a key group.
The key group combines all of the RAID groups that use the same key. One key group can be created in the
ETERNUS DX S3 series.
The key group cannot be created when a common key (*1) is not registered. Refer to
Authentication Key" (page 47)
*1: The common key for SEDs that are managed in the ETERNUS DX S3 series.
• The key group can be created even when the key server is not registered.
• The key group can be created even when communication with the key server is not available.
• Register RAID groups that use the same key in the key group. Refer to
(page 551)
• The RAID groups that are registered in the key group can be checked by using the [SED Key Group] screen.
Refer to "SED Key Group" in "ETERNUS Web GUI User's Guide (Operation)" for details.
• There are two types of SED keys: a common key and a key that is managed in the key server. RAID groups
that use the common key and RAID groups that use the key managed in the key server (RAID groups that
are registered in the key group) can be created in the same storage system.
For details on the parameters for this function, refer to
For the factory default settings for this function, refer to
The procedure to create a key group is as follows:
Procedure
1
Click [Create Key Group] in [Action].
for details.
for details.
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"A.1.10.4 Create Key Group" (page
"Appendix B Create Key Group" (page
172
"1.4.7 Register SED
"5.8 Set Key Group (RAID Group)"
754).
984).
P2X0-1270-13ENZ0