Fujitsu ETERNUS DX60 S3 User Manual page 718

Appendix A Parameter List
A.1 System Management
●
E-Mail Server Settings
• LAN Port used for SMTP Connection
Description
Input condition/
Display contents
• SMTP Server
Description
Input condition/
Display contents
• SMTP Port No.
Description
Input condition/
Display contents
• Sender E-Mail Address
Description
Input condition/
Display contents
• SMTP over SSL
Description
Input condition/
Display contents
• SMTP requires authentication
Description
Input condition/
Display contents
Input the LAN port number that is used for SMTP server.
•
MNT
•
RMT
Specify the IP address or domain name of the SMTP server that is to be used.
There are two methods to specify an IP address; "IPv4" and "IPv6". The following IPv6
addresses can be used; "link local address", "global address", "unique local address", or
"6to4 address". Refer to "Available IPv6 Address" (page 107)
rent setting is displayed, the IPv6 address is displayed as an abbreviation.
•
For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
•
For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
•
For domain name
Up to 63 alphanumeric characters and symbols
Input the port number used by the SMTP server.
1 - 65535
Input the E-Mail address of the ETERNUS DX.
Up to 63 alphanumeric characters and symbols (except space)
Select the SMTP over SSL method.
•
None
•
STARTTLS
•
SSL/TLS
Select the authentication method to connect to the SMTP server.
•
None
•
AUTH SMTP
718
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
for details. When the cur-
for details.
P2X0-1270-13ENZ0