Fujitsu ETERNUS DX60 S3 User Manual page 521

Chapter 4 Connectivity Management
4.8 NAS Management
The main setting items are as follows.
●
-
-
-
-
If an error screen appears under the following conditions, check the parameter settings.
•
•
•
•
•
3-3
Click the [OK] button
 The display returns to the initial screen.
•
•
•
3-4
To set multiple quota settings for the selected NAS user volume, repeat
If an error screen appears under the following conditions, check the parameter settings.
•
•
•
Add Quota Target
Type
Name
Drive Space
File Count
The "Name" is not entered
The "Name" does not satisfy the input conditions
The quota setting information with the same "Type" and "Name" already exists
The "Warning" or "Limit" does not satisfy the input conditions
The four threshold values for the drive space and the file count are all "0" or not specified
In the initial screen, by re-clicking the [Add] button on the bottom right of the quota target list,
the quota setting information that was previously specified in the [Add Quota Target] screen is
displayed.
If the [Type] link for the added quota setting information is clicked, the [Edit Quota Target]
screen is displayed. The quota setting information can be edited in the displayed screen.
When deleting the added quota setting information from the quota target list, select the
relevant quota setting information, and click the [Delete] button.
NAS user volume for setting the quota is not selected
Quota targets do not exist
A quota setting information with the same "NAS user volume", the same "Type" of quota target,
and the same "Name" of the quota target already exists
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
521
Step 3-1 through Step 3-3.
P2X0-1270-13ENZ0