Appendix A Parameter List
A.1 System Management
A.1.7.9
Download MIB File
For details about this function, refer to
For the factory default settings for this function, refer to
●
Download MIB File
•
Option
Description
Input condition/
Display contents
•
Version
Description
Input condition/
Display contents
A.1.7.10
Setup E-Mail Notification
For details about this function, refer to
For the factory default settings for this function, refer to
●
Notification E-Mail Settings
•
Notification E-Mail
Description
Input condition/
Display contents
•
Destination E-Mail Address
Description
Input condition/
Display contents
•
Comment
Description
Input condition/
Display contents
"1.8.9 Download MIB File" (page
Select the "The ServerView control code is added to the comment line of the MIB
definition file" checkbox when downloading the MIB file used for device monitoring by
ServerView.
"The ServerView control code is added to the comment line of the MIB definition file"
checkbox
•
Selected
•
Cleared
Select the SNMP version used for device monitoring.
•
v1
•
v2c/v3
"1.8.12 Setup E-Mail Notification" (page
Select whether to enable ("Yes") or disable ("No") the E-Mail notification function.
•
Enable
•
Disable
Specify the E-Mail destination address.
At least one address must be specified. Up to five addresses can be specified.
Up to 63 alphanumeric characters and symbols (except space)
Input the message (comment) to be added to the E-Mail. The comment can be omitted.
•
Up to 255 alphanumeric characters, symbols, and spaces
•
Within ten lines
717
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
126).
"Appendix B Download MIB File" (page
130).
"Appendix B Setup E-Mail Notification" (page
981).
982).
P2X0-1270-13ENZ0