Fujitsu ETERNUS DX60 S3 User Manual page 341

Chapter 4 Connectivity Management
4.1 Host Affinity Management
5
Select a CA port group to configure a host affinity, and click the [OK] button.
 The display returns to the initial screen.
• If a specific host group has been selected in the "Host Group" field, CA port groups for which the
affinity mode is "OFF" are not displayed.
• If "All" has been selected in the "Host Group" field, CA port groups with any of the following
conditions are not displayed:
-
-
-
6
Click the [Browse...] button for the LUN group.
 The [Select LUN Group] screen appears.
The affinity mode is "ON"
Member CA ports that used in other CA port groups
CA port groups that are being used by other host affinities
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
341
P2X0-1270-13ENZ0