Delete All Copy Path - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 7 Advanced Copy Management
7.8 REC Management
Finish
The procedure to finish the copy path setting is as follows:
Procedure
1
Click the [Done] button.
 Returns to the [Copy Path] screen.
7.8.3

Delete All Copy Path

This function deletes all of the copy path information registered in the ETERNUS DX.
• Registering the Advanced Copy function license or the Storage Cluster function license is required to use
this function.
• If an REC path, which is being used in an REC, was deleted, it may affect operations, such as the REC being
stopped. Confirm that REC is not in use before modifying the information. To check if the REC is active, use
the [Advanced Copy] screen. Refer to "Advanced Copy (Basic Information)" in "ETERNUS Web GUI User's
Guide (Operation)" for details.
• When deleting copy paths that are allocated with REC Buffers, make sure to delete the relevant REC
Buffers and REC Disk Buffers.
• This function deletes all of the copy paths configured in the ETERNUS DX. To delete some of the copy
paths, refer to "7.8.2 Set Copy Path" (page
636
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
612).
End of procedure
P2X0-1270-13ENZ0