Setup Snmp Agent Mib Access View - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 System Management
1.8 Network Management
7
Click the [OK] button.
 Setting of the SNMP Manager starts.
8
Click the [Done] button to return to the [Network] screen.
1.8.5

Setup SNMP Agent MIB Access View

This function sets up the SNMP Agent MIB View.
MIB View is used for defining the accessible area in the Management Information Base (MIB) database, with
a tree type structure. Use this item when defining the accessible area in the MIB database.
Up to ten MIB Views, including the default view, can be created for each ETERNUS DX.
There are three types of default views: "ViewALL", "View-mib2", and "View-exmib".
• If the "SNMP Function" is disabled, the [Setup SNMP Manager] function cannot be used.
• The view name that is used in the settings in
SNMP Agent User" (page 117)
can be changed.
• The default view can be changed or deleted.
For details on the parameters for this function, refer to
712).
For the factory default settings for this function, refer to
(page 981).
The procedure to change the SNMP Agent MIB view is as follows:
Procedure
1
Click [Setup SNMP MIB View] in [Action].
"1.8.6 Setup SNMP Agent User" (page 117)
cannot be changed or deleted. However, note that the MIB View (Subtree)
115
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"A.1.7.5 Setup SNMP Agent MIB Access View" (page
"Appendix B Setup SNMP Agent MIB Access View"
End of procedure
or "1.8.6 Setup
P2X0-1270-13ENZ0