Create Thin Provisioning Pool - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 6 Thin Provisioning Pool Management

6.2 Create Thin Provisioning Pool

6.2 Create Thin Provisioning Pool
This function creates a Thin Provisioning Pool.
The maximum number of pools and maximum pool capacity for each model
ETERNUS DX60 S3
ETERNUS DX100 S3
ETERNUS DX200 S3
ETERNUS DX500 S3
ETERNUS DX600 S3
ETERNUS DX8700 S3/DX8900 S3
ETERNUS DX200F
*1: Up to 256 pools can be created. When the maximum installation number of drives of a model is 512 or less, the
maximum number of pools is half the maximum installation number of drives. The maximum pool number is the
maximum total number of TPPs and FTSPs that can be created in the ETERNUS DX.
*2: The maximum pool capacity is specified when "Enable" is selected for the Thin Provisioning function. Refer to
Set Thin Provisioning" (page 557)
and FTRPs that can be created in the ETERNUS DX.
The number of member drives in each RAID group
The number of member drives for each RAID level is listed in the following table.
RAID level
High Performance (RAID1+0)
High Capacity (RAID5)
High Reliability (RAID6)
High Reliability (RAID6-FR)
Mirroring (RAID1)
Striping (RAID0)
Model Maximum Number of Pools (*1)
12
72
132
256
256
256
12
for details. The maximum pool capacity is the maximum total capacity for TPPs
Number of member drives
4, 8, 16, 24
4, 5, 8, 9, 13
6, 8, 10
13, 17, 31
2
4
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
559
Maximum Pool Capacity (TB) (*2)
32, 64
32, 64, 128, 256
32, 64, 128, 256
64, 128, 256, 384
128, 256, 512, 768
256, 512, 768, 1024
32
P2X0-1270-13ENZ0
"6.1