Appendix B Factory Default List
B.5 Thin Provisioning Management
Screen
Manual Setting
Add RAID Group
Advanced Setting
*1:
The default value varies depending on the type of drives that are installed in the ETERNUS DX and that can be used
to create new TPPs.
■
Rename Thin Provisioning Pool
Screen
Rename Setting
■
Expand Thin Provisioning Pool
Screen
Setting Thin Provisioning Pool
Manual Setting
(Add RAID Group)
■
Modify Threshold Thin Provisioning Pool
Screen
Threshold Setting
Setting item
Drive Type
RAID Level
Fast Recovery Configuration
Encryption by CM
Alarm
Warning
Attention
Controlling CM
Checkbox to select a drive
Stripe Depth
Setting item
Start of Suffix
Setting item
Expand Mode
Controlling CM
Setting item
Warning
Attention
1007
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Default value
Online (*1)
Striping (RAID0)
•
When the RAID level is "High Reliability
(RAID6-FR)"
(4D+2P)x2+1HS
•
When the RAID level is not "High Reliability
(RAID6-FR)"
Blank
Off
90 (%)
70 (%)
Automatic
All cleared
64 KB
Default value
0
Default value
Automatic
Automatic
Default value
90 (%)
75 (%)
P2X0-1270-13ENZ0