Chapter 1 System Management
1.9 Event/Dump Management
•
Click the [
•
The event types are displayed using the following symbols.
-
-
-
-
3
Click the [Cancel] button to return to the [Event/Dump] screen.
■
Delete event logs
The procedure to delete event logs is as follows:
Procedure
1
Click [Display/Delete Event Log] in [Action].
] icon or the [Refresh] button to display the latest screen.
Error level
•
Messages that start with "P" are displayed when components fail or degrade, or when a
temperature error is detected.
•
Messages that start with "M" are displayed when an event that requires maintenance occurs.
•
Messages that start with "E" are displayed when an error-level event occurs.
Warning level
•
Messages that start with "J" are displayed when components require maintenance or preven-
tive maintenance, or unusual temperatures occur.
•
Messages that start with "W" are displayed when a warning-level event occurs.
Informational level
•
Messages that start with "I" are displayed when an information-level event occurs.
•
Messages that start with "R" are displayed when error or warning level events are restored to
a normal state.
Messages that start with "O" are displayed when any other events that are not described above
occur.
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
149
End of procedure
P2X0-1270-13ENZ0