Fujitsu ETERNUS DX60 S3 User Manual page 91

Chapter 1 System Management
1.7 User Management
• There are supplementary notes when using RADIUS Authentication. Refer to
Authentication" (page 1070)
• When using RADIUS Authentication, registering user account information (user ID, password, and role) in
RADIUS server is required. For details, refer to the manuals provided with the server.
• Even if the RADIUS Authentication function has been changed to "Disable", RADIUS setting information in
the ETERNUS DX is maintained.
For details on the parameters for this function, refer to
For the factory default settings for this function, refer to
The procedure to modify RADIUS is as follows:
Procedure
1
Click [Modify RADIUS] in [Action].
2
Specify the parameters.
The main setting items are as follows.
●
RADIUS Setting
• RADIUS Authentication
• Recovery Mode
●
Primary Server (required) / Secondary Server
• Domain Name / IP Address
• Port No.
• LAN Port
• Authentication Mode
• Shared Secret
• Retry Out Time
for details.
91
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"Appendix G Using RADIUS
"A.1.6.2 Modify RADIUS" (page
"Appendix B Modify RADIUS" (page
698).
977).
P2X0-1270-13ENZ0