Forbid Advanced Copy - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 3 Volume Management

3.11 Forbid Advanced Copy

3.11 Forbid Advanced Copy
This function protects a volume so that the volume cannot be registered as the copy destination volume of
Advanced Copy.
The [Forbid Advanced Copy] is a function that protects the data in the selected volumes by forbidding the
volume to be the copy destination of the Advanced Copy sessions or restoration setting. When the Advanced
Copy function is used by multiple software, the same volumes may be used by multiple software, resulting in
unexpected data corruption. This function is available to protect the data in the copy source from being
deleted.
• If an Advanced Copy license is not registered, volume protection is not enabled. However, when using the
ETERNUS DX60 S3/DX100 S3/DX200 S3 and the ETERNUS DX200F, a free license is registered by default
and volumes can be protected.
• "Standard", "WSV", "TPV", and "FTV" type volumes can be protected.
• The following volumes cannot be protected:
- ODX Buffer volumes
- NAS system volumes
- Volumes that are already protected
- Volumes that are already used as copy destination volumes
- Volumes that are used for the Storage Cluster function
The procedure to protect a volume is as follows:
Procedure
1
Select the volume to be protected (multiple selections can be made) and click [Forbid
Advanced Copy] in [Action].
 A confirmation screen appears.
2
Click the [OK] button.
 Setting of the copy destination protect starts.
3
Click the [Done] button to return to the [Volume] screen.
313
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0