Chapter 4 Connectivity Management
4.1 Host Affinity Management
8
After confirming the host affinity settings, click the [Modify] button.
If an error screen appears under the following conditions, check the parameter settings.
•
The host interface type of the host and the CA type of the CA port do not match
Note that the CA types of "FCoE" and "FC" are regarded as the same CA type.
•
The number of hosts exceeds the maximum number per CA port
•
A host cannot recognize some LUNs
A confirmation screen appears.
9
Click the [OK] button.
The modification of the host affinity starts.
10
Click the [Done] button to return to the [Connectivity] screen.
363
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0