Fujitsu ETERNUS DX60 S3 User Manual page 967

Appendix A Parameter List
A.7 Advanced Copy Management
• Capacity
Description
Input condition/
Display contents
If "Use all Largest Free Space" is selected, inputting the capacity is not required. The specified value and unit are not
used.
Up to 15 numbers can be used. If a decimal point is included in the input value, up to 14 numbers can be used.
[Example] 0.1234567890123 (14 numbers and a decimal point)
• Type
Description
Input condition/
Display contents
• Use all Largest Free Space
Description
Input condition/
Display contents
•
When "Enable" is selected, the capacity and the unit are not available.
•
The capacity for the created ODX Buffer volume is not displayed. Use the [Volume] screen to check the volume
capacity after volume creation is complete.
Specify the ODX Buffer volume capacity and select the unit of capacity.
Up to a 15-digit number including the "." (decimal point) can be input. Note that when
"MB" is selected, the specified value is rounded down to the nearest whole number.
When "GB" or "TB" is selected, the specified value is converted to "MB" and rounded down
to the nearest whole number.
•
1 GB - 1 TB
•
TB/GB/MB
Select the ODX Buffer volume type.
If the Thin Provisioning function is disabled, "Standard" is displayed in this field.
•
Standard
Volumes that are created in RAID groups.
•
Thin Provisioning Volume
Volumes that are created in TPPs.
Select the "Enable" checkbox to create an ODX Buffer volume with the largest available
free space in the RAID group.
This checkbox can be selected or cleared only when "Type" is "Standard".
If "Enable" is selected, an ODX Buffer volume with a capacity of up to 1TB is created with
the available space displayed in the "Largest Free Space" field for the selected RAID
group.
"Enable" checkbox
•
Selected
•
Cleared
967
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0