Setup Power Management - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 System Management
1.4 System Management
4
Click the [Done] button to return to the [System Settings] screen.
1.4.8

Setup Power Management

This function connects the external device and controls (shuts down) the ETERNUS DX power.
If this function is enabled by mistake, the ETERNUS DX may shut down unexpectedly. Make sure to check
setting contents before performing settings.
For details on the parameters for this function, refer to
For the factory default settings for this function, refer to
The procedure to perform power management setting is as follows:
Procedure
1
Click [Setup Power Management] in [Action].
2
Specify the parameters.
■ For the ETERNUS DX8700 S3/DX8900 S3
48
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"A.1.3.7 Setup Power Management" (page
"Appendix B Setup Power Management" (page
End of procedure
678).
974).
P2X0-1270-13ENZ0