Fujitsu ETERNUS DX60 S3 User Manual page 244

Chapter 2 Component Management
2.7 Add Channel Adapter Port
The main setting item is as follows.
●
License Key
• License Key
4
Click the [Next >>] button.
 The [Register license of additional Channel Adapter Port] screen appears. The [Define additional
Channel Adapter port] screen appears after the registration of the license key is complete.
5
Add the CA port according to the displayed procedure and click the [Next >>] button.
The operations and displayed screen vary depending on the host interface type that is used.
■ For FC, FCoE, 10G iSCSI, or 10G-NAS host interface:
 The installation of SFP starts and the [Check SFP Installation] screen appears. After the installation
of the SFP is complete (when the CA includes an SFP), the installation of the CA port starts and the
[Status Check] screen appears. After the installation of the CA port is complete, the [Finish] screen
appears.
■ For 1G iSCSI, SAS, or 1G-NAS host interface:
 The CA port installation starts and the [Status Check] screen appears. After the installation is
complete, the [Finish] screen appears.
6
Click the [Done] button to return to the [Channel Adapter] screen.
244
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0