Fujitsu ETERNUS DX60 S3 User Manual page 698

Appendix A Parameter List
A.1 System Management
A.1.6.2 Modify RADIUS
For details about this function, refer to
For the factory default settings for this function, refer to
●
RADIUS Setting
• RADIUS Authentication
Description
Input condition/
Display contents
• Recovery Mode
Description
Input condition/
Display contents
"1.7.3 Modify RADIUS" (page
Select whether to "Enable" or "Disable" RADIUS Authentication.
•
Enable
Use RADIUS Authentication.
•
Disable
Use the internal authentication.
When "Enable" has been specified in the "RADIUS Authentication" field, select the
desired operation if RADIUS Authentication fails.
If RADIUS Authentication fails when "No" has been selected for "Recovery Mode", logging
on to ETERNUS Web GUI will not be available.
Selecting "Yes" is recommended.
•
Yes (Communication error / Authentication error)
When communication with the RADIUS server fails or communication with the
RADIUS server succeeds but authentication fails, internal authentication is
performed.
•
Yes (Communication error)
When communication with the RADIUS server fails, internal authentication is
performed.
•
No
Even when communication with the RADIUS server fails, or communication with the
RADIUS server succeeds but authentication fails, internal authentication is not
performed.
698
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
90).
"Appendix B Modify RADIUS" (page 977).
P2X0-1270-13ENZ0