Appendix A Parameter List
A.4 Connectivity Management
•
Authentication Server (3)
Description
Input condition/
Display contents
A.4.7.8
Add Quota Setting
For details about this function, refer to
For the factory default settings for this function, refer to
●
Select Volume
•
Radio button to select a NAS user volume
Description
Input condition/
Display contents
●
Quota Target
•
Checkbox to select a quota setting information
Description
Input condition/
Display contents
●
Add Quota Target
•
Type
Description
Input condition/
Display contents
•
Name
Description
Input condition/
Display contents
Input the IPv4 address, IPv6 address, or the FQDN of the LDAP authentication server.
Up to 255 alphanumeric characters and symbols (in the US-ASCII format)
The following list shows the available characters:
•
0 (0x30) - 9 (0x39)
•
A (0x41) - Z (0x5A), a (0x61) - z (0x7A)
•
Hyphen (0x2D), period (0x2E), comma (0x3A)
"4.8.10 Add Quota Setting" (page
Select a quota target NAS user volume.
A quota target NAS user volume
Select a quota setting information to be deleted.
Only the quota setting information that was added can be deleted. Multiple quota
setting information can be selected at the same time.
Checkbox
•
Selected
•
Cleared
Select a type for the quota target.
•
User
•
Group
Enter the quota target user name or group name.
Up to 255 alphanumeric characters and symbols (0x20 - 0x7E in the US-ASCII format)
(except the question mark (0x3F) and the backslash (0x5C))
899
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
517).
"Appendix B Add Quota Setting" (page
1002).
P2X0-1270-13ENZ0