Appendix A Parameter List
A.6 Thin Provisioning Management
•
Checkbox to select drives
Description
Input condition/
Display contents
A.6.5
Modify Threshold Thin Provisioning Pool
For details about this function, refer to
For the factory default settings for this function, refer to
(page
1007).
●
Threshold Setting
•
Warning
Description
Input condition/
Display contents
•
Attention
Description
Input condition/
Display contents
Select the checkbox for the drive to be selected.
Checkboxes are displayed for unused drives. For 2.5" DEs, drives are displayed from left
to right in ascending order of the slot number. For 3.5" DEs or 3.5" high density DEs,
drives are displayed from bottom left to top right in ascending order of the slot number.
Placing the mouse pointer on the
When selecting drives, refer to
Checkbox
•
Selected
•
Cleared
"6.8 Modify Threshold Thin Provisioning Pool" (page
Change the warning threshold (%) for monitoring the TPP used capacity.
Specify the warning threshold so that the "Warning" threshold is the same or larger than
the "Attention" threshold.
5 - 99
Specify the attention threshold (%) for monitoring the TPP used capacity.
Specify the Attention threshold so that the "Warning" threshold is the same or larger
than the "Attention" threshold.
The "Attention" threshold can be omitted. When setting the "Attention" threshold, select
the checkbox.
Checkbox
•
Selected
5 - 80
•
Cleared
933
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
icon displays the detailed information of the drive.
"Requirements for selecting drives" (page
"Appendix B Modify Threshold Thin Provisioning Pool"
563).
580).
P2X0-1270-13ENZ0