Fujitsu ETERNUS DX60 S3 User Manual page 404

Chapter 4 Connectivity Management
4.2 Host Group Management
(3)
Manually specify the SAS address of the host to be added.
The main setting item is as follows.
●
Host Setting
• SAS Address
If an error screen appears under the following conditions, check the parameter settings.
•
•
(4)
Click the [OK] button
 Returns to the [Manual Input] screen.
(5)
Repeat
If an error screen appears under the following conditions, check the parameter settings.
•
•
•
•
•
•
•
The "SAS Address" is not entered
The "SAS Address" does not satisfy the input conditions
Step (2) through Step (4)
The "Host Group Name" is not entered
The "Host Group Name" does not satisfy the input conditions
The "Host Group Name" overlaps with an existing host group name (Host group names cannot
overlap with any other host group names, irrespective of the interface types.)
The several SAS hosts with the same SAS addresses have been registered
A host cannot recognize some LUNs
Nine or more hosts are registered in the host group or no hosts are registered in the host group
The total number of hosts has exceeded the maximum number for the ETERNUS DX
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
to set more SAS addresses.
404
P2X0-1270-13ENZ0