Fujitsu ETERNUS DX60 S3 User Manual page 549

Chapter 5 RAID Group Management
5.7 Assign Eco-mode Schedule (RAID Group)
• Before applying Eco-mode for RAID groups, use the procedure in
(page 75)
• Set the Eco-mode schedule using the procedure in
• When selecting multiple RAID groups as the target of the Eco-mode, the same Eco-mode schedule can be
specified for all the selected RAID groups.
• RAID groups that configure a WSV can be checked in the [Volume Detail] screen. Refer to "Volume Details
(Used RAID Group)" in "ETERNUS Web GUI User's Guide (Operation)" for details.
• To use Eco-mode for RAID groups registered in Thin Provisioning Pools, assign the Eco-mode schedule to
the Thin Provisioning Pools. Refer to
584) for details.
• Note that Eco-mode cannot be set to RAID groups registered in the FTSP.
For details on the parameters for this function, refer to
920).
For the factory default settings for this function, refer to
(page 1005).
The procedure to set Eco-mode schedule for the RAID group is as follows:
Procedure
1
Select the RAID group to assign the Eco-mode schedule (multiple selections can be made)
to and click [Assign Eco-mode] in [Action].
2
Select the Eco-mode schedule that is to be assigned and select the Eco-mode action.
The main setting items are as follows.
●
Eco-mode Schedule Setting
• Eco-mode Schedule
• Eco-mode Action
to enable the Eco-mode setting for the ETERNUS DX S3 series.
"6.10 Assign Eco-mode Schedule (Thin Provisioning Pool)" (page
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"1.6.1 Modify Eco-mode General Setting"
"1.6.4 Modify Eco-mode Schedule" (page
"A.5.6 Assign Eco-mode Schedule (RAID Group)" (page
"Appendix B Assign Eco-mode Schedule (RAID Group)"
549
80).
P2X0-1270-13ENZ0