Recover Nas System Volume - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 2 Component Management
2.8 NAS Recovery Management
2.8.3

Recover NAS System Volume

This function recovers the NAS system volumes (RootFS) that are used by the target NAS Engine and forcibly
enables the NAS Engine.
A "RootFS" is a volume that stores the root file system of the NAS Engine in each CM. If a malfunction occurs in
the NAS Engine due to an inconsistency between the both RootFSs, use this function to recover the RootFS
and forcibly enable the NAS Engine again.
This function is displayed in a Unified Storage environment.
This function is available when the following target NAS system volumes exist.
• The target NAS system volume in CM#0 is $SYSVOL2
• The target NAS system volume in CM#1 is $SYSVOL3
The procedure to recover the NAS system volume is as follows:
Procedure
1
Select the NAS Engine that is to be recovered and click [Recover NAS System Volume] in
[Action].
 A confirmation screen appears.
2
Click the [OK] button.
 Recovery of the NAS system volumes starts.
3
Click the [Done] button to return to the [Controller Module] screen.
247
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0