Fujitsu ETERNUS DX60 S3 User Manual page 79

Chapter 1 System Management
1.6 Eco-mode Management
• When deleting the added event, select the event, and click the [Delete] button.
• When changing the added event, select the event, and click the [Edit] button.
4
Click the [Apply] button.
 The event is added to the "Event List".
5
Repeat
6
After adding all the events, click the [Set] button.
 A confirmation screen appears.
If an error screen appears under the following conditions, check the parameter settings.
• "Schedule Name" has not been entered
• "Schedule Name" matches with an existing schedule name
7
Click the [OK] button.
 Creation of the Eco-mode schedule starts.
8
Click the [Done] button to return to the [Eco-mode] screen.
Step 2 through Step 4 to configure multiple events.
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
79
End of procedure
P2X0-1270-13ENZ0