Appendix A Parameter List
A.1 System Management
A.1.12.2
Update Customer Information
For details about this function, refer to
●
Information File
•
Customer Information File
Description
Input condition/
Display contents
When importing customer information to the ETERNUS DX all at once, click the [Browse...] button to specify the
location where the customer information file has been stored, and click the [Import] button.
■
Customer Information
●
Detailed Settings
•
Checkbox
Description
Input condition/
Display contents
•
Company Name (required)
Description
Input condition/
Display contents
•
Department/Division
Description
Input condition/
Display contents
"1.13.3 Update Customer Information" (page
Import the "Customer Information File", which was created using the REMCS ESAT, to the
ETERNUS DX.
Click the [Browse...] button to specify the "Customer Information File", or directly input
the path to the "Customer Information File".
•
Click the [Browse...] button to specify the "Customer Information File"
•
Directly input the path to the "Customer Information File"
If the "Delete any Customer Identity information from the storage system after the
information is sent to the 'REMCS Center'." checkbox is selected, customer information
saved on the ETERNUS DX is deleted after transmitting the information to the REMCS
center.
"Delete any Customer Identity information from the storage system after the information
is sent to the 'REMCS Center'." checkbox
•
Selected
•
Cleared
Input the company name that owns the ETERNUS DX.
Up to 60 alphanumeric characters and symbols
Input the department or division that owns the ETERNUS DX.
Up to 40 alphanumeric characters and symbols
765
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
196).
P2X0-1270-13ENZ0