Fujitsu ETERNUS DX60 S3 User Manual page 472

Chapter 4 Connectivity Management
4.5 Host Response Management
Recommended patterns of host responses
Host Response Name
Solaris MPxIO
HP-UX
AIX
AIX VxVM
VS850/SVC
BS2000
Default
For the setting values, refer to
For details on the parameters for this function, refer to
For the factory default settings for this function, refer to
The procedure to add a host response is as follows:
Procedure
1
Click [Add Host Response] in [Action].
2
Specify the host response name and set each parameter.
• A host response has a recommended patterns which has been prepared for each OS type.
Refer to
Select "Default" in other host connection environments.
• The host response setting can be customized. Use this function to create a new host response.
Set this parameter to connect to an Oracle Solaris host and to use the OS standard
Multipath Driver (MPxIO).
Set this parameter to connect to an HP-UX host.
Set this parameter to connect to an AIX host.
Set this parameter to connect to an AIX host and to use VERITAS Volume Manager
(VxVM).
Set this parameter to connect to an ETERNUS VS850 Virtualization Storage or an IBM SAN
Volume Controller (SVC).
Set this parameter to connect to a BS2000 host and to enable the LUN expand mode.
Set this parameter for any host connection environments that are not listed above.
"Default values for recommended patterns of host responses" (page
" Recommended patterns of host responses" (page 472)
472
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Connection Environment
"A.4.5.1 Add Host Response" (page
"Appendix B Add Host Response" (page
for details.
876).
870).
999).
P2X0-1270-13ENZ0