Fujitsu ETERNUS DX60 S3 User Manual page 460

Chapter 4 Connectivity Management
4.3 CA Port Group Management
Retained and deleted information when changing the port mode
Port mode
before
modification
The Storage Cluster function and port mode modification
Port mode
before
modification
CA
OK: The port mode can be changed
N/A: The port mode cannot be changed
*1: The port is being used for the Storage Cluster function, but the port is not used currently.
• If the port mode has been changed, the port parameter returns to the default setting. For REC line num-
ber and REC transfer mode, refer to
(page 460).
• When changing the port mode for FC-Initiator port, delete the path group specified in the target port.
Refer to "1.12.3 Delete Storage Migration Path" (page 187)
• To check whether or not the WWN for the target port has been changed, use the [FC Port] screen. Refer to
"FC Port" in the "ETERNUS Web GUI User's Guide (Operation)" for details.
For details on the parameters for this function, refer to
For the factory default settings for this function, refer to
CA
–
CA
Advanced Copy path
information is
deleted
RA
•
Mapping
information is
retained
•
Advanced Copy
path information
CA/
is deleted
RA
The Storage Cluster's usage of the port
The Storage Cluster function is not used
The Storage Cluster function is used
"Retained and deleted information when changing the port mode"
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Port mode after modification
RA
Mapping information Mapping information
is deleted is retained
–
•
Advanced Copy
path information
is retained
•
REC Line No. is
retained
•
REC Transfer
Mode is retained
–
•
Mapping
information is
deleted
•
Advanced Copy
path information
is retained
•
REC Line No. is
retained
•
REC Transfer
Mode is retained
WWN is not changed
WWN is changed (*1)
for details.
"A.4.3.10 Modify Port Mode" (page
"Appendix B Modify Port Mode" (page
460
CA/RA Initiator
Mapping information
is deleted
Advanced Copy path
information is
deleted
•
Mapping
information is
deleted
•
Advanced Copy
path information
is deleted
Port mode after modification
RA CA/RA
OK OK
OK N/A
N/A N/A
868).
999).
P2X0-1270-13ENZ0
Initiator
OK
OK
N/A