Raid Group Management - Fujitsu ETERNUS DX60 S3 User Manual

Appendix B Factory Default List
B.4 RAID Group Management
B.4

RAID Group Management

This section provides information on the default parameters of the following actions for RAID group
management.
• Create RAID Group
• Rename RAID Group
• Change Controlling CM
• Expand RAID Group
• Modify RAID Group Parameters
• Assign Eco-mode Schedule (RAID Group)
• Set Key Group (RAID Group)
■
Create RAID Group
Screen
New RAID Group
Automatic Setting
Manual Setting
Advanced Settings
*1: The default value varies depending on the type of drives that are installed in the ETERNUS DX and that can be used
to create new RAID groups.
■ Rename RAID Group
Screen
Rename Setting
■
Change Controlling CM
Screen
Change Controlling CM Setting
Setting item
Create Mode
Drive Type
RAID Level
Select Drives
RAID Level
Controlling CM
Fast Recovery Configuration
Checkbox to select a drive
Stripe Depth
Setting item
Start of Suffix
Setting item
New Controlling CM
1004
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Default value
Automatic
Online (*1)
High Performance (RAID1+0)
Minimize number of using drives
High Performance (RAID1+0)
Automatic
•
When the RAID level is "RAID6-FR"
(3D+2P)x2+1HS
•
When the RAID level is not "RAID6-FR"
Blank
All cleared
64 KB
Default value
0
Default value
Automatic
P2X0-1270-13ENZ0