Fujitsu ETERNUS DX60 S4 Design Manual
Hybrid storage systems
Hide thumbs
Also See for ETERNUS DX60 S4:
- Configuration manual (78 pages) ,
- Operation manual (88 pages) ,
- Safety precautions (12 pages)
Related Manuals for Fujitsu ETERNUS DX60 S4
Summary of Contents for Fujitsu ETERNUS DX60 S4
- Page 1 P3AM-8992-14ENZ0 FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) System configuration design...
-
Page 2: Table Of Contents
Improving Host Connectivity ......................55 Host Affinity ................................55 iSCSI Security .................................57 Environmental Burden Reduction ....................58 Eco-mode................................58 Power Consumption Visualization .........................61 FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... - Page 3 LAN Connection .......................... 107 LAN for Operation Management (MNT Port) .......................107 LAN for Remote Support (RMT Port) ........................109 LAN Control (Master CM/Slave CM)........................112 FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
- Page 4 Combinations of Functions That Are Available for Simultaneous Executions....... 146 Combinations of Functions That Are Available for Simultaneous Executions............146 Number of Processes That Can Be Executed Simultaneously ................147 FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
- Page 5 Table of Contents Capacity That Can Be Processed Simultaneously ....................147 FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
- Page 6 Figure 44 EC Reverse..............................74 Figure 45 Targets for the Multi-Copy Function ......................75 Figure 46 Multi-Copy..............................75 Figure 47 Multi-Copy (Including SnapOPC+) ......................76 FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
- Page 7 Drive Combination 2 ..........................137 Figure 87 Drive Combination 3 ..........................138 Figure 88 Drive Combination 4 ..........................139 Figure 89 Drive Combination 5 ..........................139 FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
- Page 8 Combinations of Functions That Can Be Executed Simultaneously (1/2) ..........146 Table 39 Combinations of Functions That Can Be Executed Simultaneously (2/2) ..........146 FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
- Page 9 Preface Fujitsu would like to thank you for purchasing the FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 (herein- after referred to as ETERNUS DX). The ETERNUS DX is designed to be connected to Fujitsu servers (Fujitsu SPARC Servers, PRIMEQUEST, PRIMERGY, and other servers) or non-Fujitsu servers.
- Page 10 Indicates information that you need to observe when using the ETERNUS storage system. Make sure to read the information. Indicates information and suggestions that supplement the descriptions included in this manual. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
- Page 11 - Do not use alcohol or other solvents to clean the ETERNUS storage system. Warning layout ribbon FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
-
Page 12: Function
"Host Response" (page 82) For stable operation of server connections, the appropriate re- sponse action can be specified for each server. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 13: Raid Functions
When Nearline SAS disks that have 6TB or more are used, the available RAID levels are RAID0, RAID1, RAID6, and RAID6-FR. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 14: Figure 1 Raid0 Concept
The data is stored on two duplicated drives at the same time. If one drive fails, other drive continues operation. Figure 2 RAID1 Concept Data writing request Drive#0 Drive#1 FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 15: Figure 3 Raid1+0 Concept
Parity for data I to L: P I, J, K, L Parity for data M to P: P M, N, O, P FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 16: Figure 5 Raid5+0 Concept
K, L M, N O, P Drive#0 Drive#1 Drive#2 Drive#3 Drive#4 Drive#5 RAID5 RAID5 Striping (RAID0) Striping with distributed parity (RAID5) FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 17: Figure 6 Raid6 Concept
I, J, K, L Parity for data M to P: P1 and P2 M, N, O, P M, N, O, P FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 18: Figure 7 Raid6-Fr Concept
◎: Very good ¡: Good △: Reasonable ´: Poor *1: Performance may differ according to the number of drives and the processing method from the host. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 19: User Capacity (Logical Capacity)
*1: "N" is the number of RAID6 configuration sets. For example, if a RAID6 group is configured with "(3D+2P) ´2+1HS", N is "2". FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 20: Table 4 User Capacity Per Drive
Table 4 shows the user capacity for each drive. The supported drives vary between the ETERNUS DX60 S4 and the ETERNUS DX60 S3. For details about drives, refer to "Overview" of the currently used storage systems. Table 4 User Capacity per Drive... -
Page 21: Raid Group
For details on the RAID levels that can be configured with Nearline SAS disks that have 6TB or more, refer "Supported RAID" (page 13). FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 22: Volume
A volume may be up to 128TB. However, the maximum capacity of volume varies depending on the OS of the server. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 23: Table 7 Volumes That Can Be Created
TPP. Therefore, the maximum number of volumes that can be created in the ETERNUS DX decreases by the number of RAID groups that configure a TPP. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 24: Hot Spares
Assign "Dedicated Hot Spares" to RAID groups that contain important data, in order to preferentially improve their access to hot spares. ■ Number of Installable Hot Spares Register one hot spare for each drive type. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 25: Table 8 Hot Spare Selection Criteria
*1: When there are multiple hot spares with a larger capacity than the failed drive, the hot spare with the smallest capacity among them is used first. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 26: Data Protection
The T10-DIF function can be used when connecting with HBAs that support T10-DIF with an FC interface. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... - Page 27 The T10-DIF function can be enabled only in the Standard volume. • LUN concatenation cannot be performed for volumes where the T10-DIF function is enabled. • FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
-
Page 28: Disk Drive Patrol
Drives that are stopped by Eco-mode are checked when the drives start running again. The Maintenance Operation privilege is required to set detailed parameters. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 29: Redundant Copy
However, it should be noted that when the priority is high and a Redundant Copy operation is performed for a RAID group, the performance (throughput) of this RAID group may be reduced. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 30: Rebuild
However, it should be noted that when the priority is high and a rebuild operation is performed for a RAID group, the performance (throughput) of this RAID group may be reduced. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 31: Fast Recovery
For a normal rebuild process that is performed when the reserved space is already being used and the second drive fails, a copyback is performed according to the settings of the Copybackless function. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 32: Copyback/Copybackless
Copyback is not performed for the data even if the failed drive is replaced by a new drive because the failed drive is used as a hot spare. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 33: Figure 17 Copybackless
If the Copybackless function is enabled, the drive that is replaced with the failed drive cannot be installed in • the prior RAID group configuration. This should be taken into consideration when enabling or disabling the Copybackless function. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 34: Protection (Shield)
RAID group configuration drive and copyback starts. The copybackless setting can be enabled or disabled until the drive is replaced. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 35: Reverse Cabling
Reverse cabling connection in the drive enclosure that follows the failed one. (Connect the controller enclosure to the last drive enclosure) Accessible Inaccessible FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 36: Operations Optimization (Virtualization)
Figure 20 Storage Capacity Virtualization Data that is Virtual volume actually used Physical drives Allocated RAID group Management server Allocated as required Write Mapping FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 37: Table 9 Tpp Maximum Number And Capacity
(chunk size) that is applied is the same value as the chunk size of the TPP where the TPV is created. The physical storage capacity can be reduced by allocating a virtualized storage capacity. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 38: Table 12 Tpp Thresholds
TPP are treated as Advanced Format volumes. In this case, the write performance may be reduced when accessing the relevant TPV from an OS or an application that does not support Advanced For- mat. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 39: Figure 21 Tpv Balancing (When Allocating Disproportionate Tpv Physical Capacity Evenly)
RAID group in the TPP. TPV balancing may not be available when other functions are being used in the device or the target volume. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... - Page 40 While TPV balancing is being performed, the balancing level may become lower than before balancing was performed if the capacity of the TPP to which the TPVs belong is expanded. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
-
Page 41: Figure 23 Tpv Capacity Optimization
For details on the functions that can be executed simultaneously, refer to "Combinations of Functions That Are Available for Simultaneous Executions" (page 146). FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 42: Optimization Of Volume Configurations
The RAID level for RAID groups can be changed. Adding drives while changing is also available. This is used to convert the RAID level of all the volumes belonging to a given RAID group. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... - Page 43 Distributing a single volume to multiple RAID groups makes I/O access from the server more efficient and im- proves the performance. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
-
Page 44: Raid Migration
A volume is changed to the appropriate type for the migration destination RAID groups or pools (TPP). • Changing the number of concatenations and the Wide Stripe Size (for WSV) FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 45: Logical Device Expansion
RAID5 (3D+1P) 600GB x 4 LUN0 Expansion RAID5 (5D+1P) 600GB x 6 LUN0 Unused 600GB x 2 Expands the capacity by adding two drives FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 46: Figure 27 Logical Device Expansion (When Changing The Raid Level)
RAID group from an OS or an application that does not support Ad- vanced Format. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 47: Lun Concatenation
A new volume can be created by selecting a RAID group with unused capacity. Figure 29 LUN Concatenation (When the Concatenation Source Is a New Volume) Concatenation 60GB 10GB 20GB 30GB Unused area FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 48: Figure 30 Lun Concatenation (When The Existing Volume Capacity Is Expanded)
OS or an application that does not support Advanced Format. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 49: Wide Striping
WSV, the write performance may be reduced when accessing the cre- ated WSVs from an OS or an application that does not support Advanced Format. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 50: User Access Management
Up to 16 users can be logged in at the same time using ETERNUS Web GUI or ETERNUS CLI. The menu that is displayed after logging on varies depending on the role that is added to a user account. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 51: Table 15 Available Functions For Default Roles
The function categories for the roles cannot be changed. • • A role must be assigned when creating a user account. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 52: User Authentication
When the primary RADIUS server failed to authenticate, the secondary RADIUS server attempts to authenticate. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... - Page 53 When using RADIUS authentication, if the role that is received from the server is unknown (not set) for the • device, RADIUS authentication fails. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
-
Page 54: Audit Log
↓ the process details, Log out and the process results Audit log System administrator ETERNUS DX Syslog server FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 55: Improving Host Connectivity
Permission for Server C LUN#0 → Volume#256 … LUN#127 → Volume #383 Permission for Server D LUN#0 → Volume#384 … LUN#127 → Volume #511 FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 56: Figure 35 Associating Host Groups, Ca Port Groups, And Lun Groups
When servers are duplicated and connected using a cluster configuration to share a single ETERNUS DX • among multiple servers, cluster control software is required. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 57: Iscsi Security
Note that the Internet Storage Name Service (iSNS) is also supported as an iSCSI name resolution. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 58: Environmental Burden Reduction
No volumes are registered • • Configured with SSDs RAID groups to which the volume with Storage Migration path belongs • FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 59: Table 17 Eco-Mode Specifications
*1: The monitoring time period to check if there is no access to a disk for a given length of time and stop the drive. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... - Page 60 Accessible in 1 to 5 min The motor starts rotating The disk stops 10 min after the scheduled operation 10 min before the scheduled operation FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
-
Page 61: Power Consumption Visualization
Power consumption Temperature ETERNUS DX storage systems ETERNUS SF Storage Cruiser Collects power consumption and temperature data for each storage system. Server FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 62: Operation Management/Device Monitoring
■ ETERNUS SF ETERNUS SF can manage a Fujitsu storage products centered storage environment. An easy-to-use interface ena- bles complicated storage environment design and setting operations, which allows easy installation of a storage system without needing to have high level skills. -
Page 63: Performance Information Management
• Write Cache Hit Rate (cache hit rate for write) • • Prefetch Cache Hit Rate (cache hit rate for prefetch) FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... - Page 64 If performance monitoring is started from ETERNUS Web GUI or ETERNUS CLI, the process can be stopped • from ETERNUS SF Storage Cruiser. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
-
Page 65: Event Notification
The ETERNUS DX supports "SMTP AUTH" and "SMTP over SSL" as user authentication. A method can be selected from CRAM-MD5, PLAIN, LOGIN, or AUTO which automatically selects one of these methods. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 66: Table 20 Snmp Specifications
ETERNUS DX, and prevents known errors from occurring. Firmware can also be registered manually. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... - Page 67 Using the ETERNUS Multipath Driver to monitor the storage system by host senses is recommended. Sense codes that cannot be detected in a single configuration can also be reported. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
-
Page 68: Device Time Synchronization
Figure 39 Device Time Synchronization NTP server Date and Time yyyy xx:xx:xx Time Zone + 09.00 Daylight Saving Time ETERNUS DX FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 69: Power Control
ETERNUS DX. Figure 40 Power Synchronized Unit Server Server for server for server Power synchronized unit ETERNUS DX FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 70: Remote Power Operation (Wake On Lan)
ETERNUS Web GUI or ETERNUS CLI can be used to turn off the power of an ETERNUS DX remotely. Figure 41 Wake On LAN Administration terminal Wake On LAN utility Packet transmission ETERNUS DX FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 71: Backup (Advanced Copy)
Server, or Symfoware Server without stopping operations. ETERNUS SF Express ETERNUS SF Express allows easy management and backup of systems with a single product. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 72: Backup
Creating a backup of the data that is updated in small amounts Performing system test data replication • Restoration from a backup • FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 73: Table 23 Characteristics Of Snapopc/Snapopc+ Operations With Each Type Of Copy Destination Logical Volume
I/O access error message is output to the server log message and other destinations. To prevent error messages from being output, consider using other monitoring methods. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 74: Figure 43 Restore Opc
Restoration can be performed by switching the copy source and destination of the EC. Figure 44 EC Reverse Copy source Copy destination Reverse Copy destination Copy source FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 75: Figure 45 Targets For The Multi-Copy Function
8 destination 2 Copy source Copy Copy destination 7 destination 3 Copy Copy destination 6 destination 4 Copy destination 5 FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 76: Figure 47 Multi-Copy (Including Snapopc+)
2 must be included in the copy destination area for copy session 1. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 77: Figure 48 Cascade Copy
Use a Cascade Copy of QuickOPC (copy session 1) and OPC (copy session 2). When backing up two generations • Use a multi-copy that is configured with QuickOPC and QuickOPC. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 78: Table 25 Available Cascade Copy Combinations (When A Cascade Copy Performs Session 2 Followed By Session 1)
Use a Cascade Copy of QuickOPC (copy session 1) and OPC (copy session 2). When backing up two generations • Use a multi-copy that is configured with QuickOPC and QuickOPC. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... - Page 79 OPC / QuickOPC OPC / QuickOPC / SnapOPC / SnapOPC+ / EC : Copy session 1 : Copy session 2 FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
-
Page 80: Performance Tuning
"Stripe Depth 512KB" cannot be specified for a "RAID5 (4D+1P)" configuration that is used for TPPs. • "Stripe Depth 256KB" cannot be specified for a "RAID5 (8D+1P)" configuration that is used for TPPs. • FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 81: Assigned Cms
If an assigned controller is disconnected for any reason, the assigned CM is replaced by another controller. After the disconnected controller is installed again and returns to normal status, this controller becomes the assigned CM again. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 82: Stable Operation Via Load Control
The maximum number of LUNs that can be mapped to the LUN group varies depending on the connection • operation mode of the host response settings. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 83: Data Migration
The capacity of a volume that is to be specified as the migration destination area must be larger than the migra- tion source volume capacity. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... - Page 84 For the migration destination device, the FC port mode needs to be switched to "Initiator" and the port pa- • rameter also needs to be set. Make sure to delete the migration path after Storage Migration is complete. • FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
-
Page 85: Non-Disruptive Storage Migration
RAID Migration to read data from the migration target volume in the external storage system and write data to the migration destination volume in the local storage system. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... - Page 86 Make sure to delete the Non-disruptive Storage Migration License after the Non-disruptive Storage Migra- • tion is complete. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
-
Page 87: Server Linkage Functions
Setting and deletion of the • Management access groups (host affinity) server Oracle VM Manager ETERNUS DX Linkage software ETERNUS DX software (setup tool) FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 88: Vmware Linkage
Client management screen ETERNUS DX • Full Copy (XCOPY) Copying in a storage system Linkage software ETERNUS DX software (setup tool) FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... - Page 89 ETERNUS vCenter Plug-in is required to use this function. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
-
Page 90: Veeam Storage Integration
- Backup and restore of virtual machines - Data transfer ETERNUS DX Veeam Storage Integration software ETERNUS DX software (setup tool) FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 91: Table 28 Volume Types That Can Be Used With Veeam Storage Integration
• the Backup Proxy using ETERNUS CLI. For more details, refer to "ETERNUS CLI User's Guide". To enable the ETERNUS DX storage snapshot integration with Veeam Backup & Replication, FUJITSU Plug-In • for Veeam Backup & Replication must be installed to the Veeam backup server. -
Page 92: Microsoft Linkage
• Offloaded Data Transfer (ODX) SMI-S Copying in a storage system SCVMM management server SCVMM management console Linkage software ETERNUS DX software (setup tool) FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... - Page 93 SCVMM is a component of System Center 2012 or later that performs integrated management of virtualized envi- ronments. The ETERNUS DX can be managed from SCVMM by using the SMI-S functions of the ETERNUS DX. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
-
Page 94: Openstack Linkage
ETERNUS DX and assigning created volumes to VM instances can be performed via an Open- Stack standard interface (Horizon). FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 95: Logical Volume Manager (Lvm)
Logical volume Physical group Physical volume Physical volume Physical volume RAID group #0 RAID group #1 RAID group #2 ETERNUS DX FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 96: Smart Setup Wizard
RAID5 ´ 1 Approximately Approximately 5.2TB 5.2TB RAID5 ´ 1 Approximately Approximately 6.9TB 6.9TB RAID5 ´ 1 Approximately Approximately 6.9TB 6.9TB FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... - Page 97 RAID5 ´ 3 Approximately Approximately 12.2TB 36.6TB RAID5 ´ 3 Approximately Approximately 13.9TB 41.8TB RAID5 ´ 4 Approximately Approximately 10.4TB 41.8TB FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
- Page 98 RAID5 ´ 5 Approximately Approximately 13.9TB 69.8TB RAID5 ´ 5 Approximately Approximately 13.9TB 69.8TB RAID5 ´ 5 Approximately Approximately 13.9TB 69.8TB FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
-
Page 99: Figure 58 Raid Configuration Example (When 12 Ssds Are Installed)
RAID6 ´ 2 Approximately Approximately 4.2TB 8.5TB RAID6 ´ 2 Approximately Approximately 4.2TB 8.5TB RAID6 ´ 2 Approximately Approximately 4.2TB 8.5TB FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... - Page 100 RAID6 ´ 4 Approximately Approximately 6.4TB 25.6TB RAID6 ´ 4 Approximately Approximately 6.4TB 25.6TB RAID6 ´ 4 Approximately Approximately 7.4TB 29.8TB FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
-
Page 101: Figure 59 Raid Configuration Example (When 15 Sas Disks Are Installed)
RAID6 group 2 (*1) Drive#6 Drive#7 Drive#8 Drive#9 Drive#10 Drive#11 *1: The capacity of the user data area is equivalent to four drives. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 102: Connection Configuration
Host Interface This section describes each host interface. The supported host interfaces vary between the ETERNUS DX60 S4 and the ETERNUS DX60 S3. For details about host interfaces, refer to "Overview" of the currently used storage systems. When switches are used, zoning should be set for the switches to ensure the security of data. -
Page 103: Table 31 Ethernet Frame Capacity (Jumbo Frame Settings)
DCB is an enhanced function of traditional Ethernet and a standard for Fabric connections in data centers. The DCB function allows connections to Converged Enhanced Ethernet (CEE) environments. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... - Page 104 One of the following transfer rates can be specified: For SAS 12Gbit/s • 12Gbit/s 6Gbit/s 3Gbit/s For SAS 6Gbit/s • 6Gbit/s 3Gbit/s 1.5Gbit/s FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
-
Page 105: Access Method
Figure 61 Single Path Connection (When a SAN Connection Is Used — Switch Connection) Server Server Server Switch Port Port Port Port CM#0 CM#1 ETERNUS DX FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 106: Figure 62 Multipath Connection (When A San Connection Is Used - Basic Connection Configuration)
When servers are duplicated and connected using a cluster configuration to share a single ETERNUS DX among multiple servers, cluster control software is required. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 107: Lan Connection
"LAN for Remote Support (RMT Port)" (page 109) and use the RMT ports to connect to the remote support center via a different network. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 108: Figure 64 Connection Example Without A Dedicated Remote Support Port
RMT ports are not used. The IP addresses of the Master CM and the Slave CM are set. CM#0 CM#1 Controller enclosure ETERNUS DX FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 109: Lan For Remote Support (Rmt Port)
Sending ETERNUS DX logs to the AIS Connect server • Remote access from the AIS Connect server to the ETERNUS DX • FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 110: Figure 67 Security Features
The sections that are shown below explain how to set the ETERNUS DX for remote support. For details on the settings, refer to "Configuration Guide (Web GUI)". FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 111: Figure 68 Connection Example With A Dedicated Remote Support Port
IP address A Router CM#0 CM#1 Remote support center Controller enclosure ETERNUS DX Different LANs are used for MNT ports and RMT ports. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 112: Lan Control (Master Cm/Slave Cm)
Master CM and the other CM is called the Slave CM. When an error occurs in the Master CM or LAN, the Master CM is switched automatically. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 113: Figure 70 Lan Control (Switching Of The Master Cm)
The IP address of the Slave CM is ETERNUS DX used to switch the Master CM and display the status of the ETERNUS DX. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 114: Network Communication Protocols
Used for ent) firmware down- load, etc. ´ ´ AIS Connect (remote https (cli- ¡ (*2) ¡ (*2) — support) ent) FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... - Page 115 For details on the port numbers for the Storage Foundation Software ETERNUS SF, refer to the manual of each Storage Foundation Software ETERNUS SF. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
-
Page 116: Power Supply Connection
Configurations where the controller enclosure is powered by the UPS while the drive enclosures are powered di- rectly from AC are not supported. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 117: Power Synchronized Connections
ETERNUS DX RS232C cable An instruction is issued to turn on/off the ETERNUS DX when AC output/no AC output is detected. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... - Page 118 Shutdown of all the server UPS units Issuance of command to turn off the ETERNUS DX from the power synchronized unit ETERNUS DX shutdown FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
-
Page 119: Figure 73 Power Supply Control Using A Power Synchronized Unit (When Connecting Three Or More Servers)
ETERNUS DX startup *1: The server must be set to suspend server OS startup until the ETERNUS DX startup is complete. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 120: Power Synchronized Connections (Wake On Lan)
MN T CM#1 Powering on sequence A power on instruction is issued to the ETERNUS DX via the LAN. ETERNUS DX startup FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 121: Hardware Configurations
Multiple options can be selected in the ETERNUS DX according to the customer's requirements. This chapter de- scribes the installation conditions and standard installation rules for each component. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 122: Configuration Schematics
Board that is located between the front of the enclosure and the rear of the enclosure (the controller (CM) or I/O module (IOM) side) PSU: Power Supply Unit FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 123: Figure 76 Minimum Configuration Diagram: Eternus Dx60 S3
Board that is located between the front of the enclosure and the rear of the enclosure (the controller (CM) or I/O module (IOM) side) PSU: Power Supply Unit FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 124: Figure 77 Maximum Configuration Diagram: Eternus Dx60 S4
Memory PANEL IOM#0 IOM#1 PANEL IOM#0 IOM#1 PANEL IOM#0 IOM#1 PANEL: Operation Panel Controller Enclosure Controller Module Channel Adapter Host Interface FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... - Page 125 Board that is located between the front of the enclosure and the rear of the enclosure (the controller (CM) or I/O module (IOM) side) PSU: Power Supply Unit FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
-
Page 126: Figure 78 Maximum Configuration Diagram: Eternus Dx60 S3
IOM#1 PANEL IOM#0 IOM#1 PANEL IOM#0 IOM#1 PANEL: Operation Panel Controller Enclosure Controller Module Channel Adapter Host Interface Memory: Cache Memory FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... - Page 127 Board that is located between the front of the enclosure and the rear of the enclosure (the controller (CM) or I/O module (IOM) side) PSU: Power Supply Unit FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0...
-
Page 128: Figure 79 Enclosure Connection Path (When Only One Controller Is Installed)
DI (IN) DE#01 DI (IN) DI (OUT) DI (OUT) DI (OUT): Drive interface (OUT) port DI (IN): Drive interface (IN) port FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 129: Optional Product Installation Conditions
SAS 12Gbit/s SAS 6Gbit/s • ● ETERNUS DX60 S3 FC 8Gbit/s • • iSCSI 10Gbit/s iSCSI 1Gbit/s • SAS 6Gbit/s • FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 130: Drive Enclosures
Up to three drive enclosures can be installed. I/O Module Up to two I/O modules can be installed in a drive enclosures. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 131: Drives
Nearline SAS disks are high capacity cost effective disks for data backup and archive use. Nearline SAS disks can store information that requires a low access rate at a reasonable speed more cost effectively than SAS disks. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 132: Table 33 Drive Characteristics
I/O access load. Using a RAID1+0, RAID5, RAID5+0, or RAID6 configuration is rec- ommended. The ETERNUS DX60 S4 supports Value SSDs. They are available at a lower cost per capacity than conventional SSDs by optimizing the guaranteed write endurance and the reserved space. -
Page 133: Table 34 Number Of Installable Drives
For details on the number of required hot spares, refer to "■ Number of Installable Hot Spares" (page 24) "Hot Spares" (page 24). FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 134: Standard Installation Rules
3.5" type drive enclosures 2.5" type drive enclosures Drive enclosures are installed above the controller enclosure according to the priority order. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 135: I/O Module
Rear view of a drive enclosure Drive This section explains the installation rules for drives. The supported drives vary between the ETERNUS DX60 S4 and the ETERNUS DX60 S3. For details about drives, refer to "Overview" of the currently used storage systems. ■... -
Page 136: Figure 83 Installation Diagram For 2.5" Drives
Then, install drives in the slots of a drive enclosure from Slot#0 to Slot#11 in ascending order. Figure 84 Installation Diagram for 3.5" Drives Slot#11 Slot#8 Slot#9 Slot#10 Slot#4 Slot#5 Slot#6 Slot#7 Slot#0 Slot#1 Slot#2 Slot#3 FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 137: Recommended Raid Group Configurations
Figure 85 Drive Combination 1 DE#00 Mirroring Example 2: Paired drives are installed in two different enclosures Figure 86 Drive Combination 2 DE#00 Mirroring DE#01 FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 138: Figure 87 Drive Combination 3
Recommended RAID Group Configurations Example 3: Paired drives are installed in three different enclosures Figure 87 Drive Combination 3 DE#00 Mirroring DE#01 Mirroring DE#02 FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 139: Figure 88 Drive Combination 4
Example 5: Drives are installed in three different enclosures Figure 89 Drive Combination 5 DE#00 DE#01 DE#02 Redundancy Group 1 Redundancy Group 2 FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 140: Maintenance/Expansion
■ Hot Swap/Hot Expansion (ETERNUS DX60 S4) The table below shows whether hot swap or hot expansion for components of the ETERNUS DX60 S4 is possible. Table 35 Hot Swap and Hot Expansion Availability for Components (ETERNUS DX60 S4) Component... -
Page 141: Table 36 Hot Swap And Hot Expansion Availability For Components (Eternus Dx60 S3)
*5: Operation can be continued during a failure. The status of the ETERNUS DX can be monitored via ETERNUS Web GUI or ETERNUS CLI. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 142: User Expansion
The Maintenance Operation policy is required to sanitize the SSDs. Also, change the status of the ETERNUS DX to the maintenance status. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED... -
Page 143: Function Specification List
ICMP ¡ ¡ Network address IPv4, IPv6 ¡ ¡ Authentication RADIUS ´ ¡ CHAP ´ ¡ ¡: Supported ´: Not supported FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 144: Target Pool For Each Function/Volume List
¡ ¡ ´ ´ ´ ´ LUN Concatenation ¡ ¡ ¡ (*7)(*8) (*7)(*8) Balancing ´ ´ ´ ´ ´ ¡ ¡ FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... - Page 145 SnapOPC/SnapOPC+ is also set as the copy source (Cascade Copy/restore). *11: This is part of the cache parameter settings, and cannot be configured in the units of volumes. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
-
Page 146: Combinations Of Functions That Are Available For Simultaneous Executions
¡ (*4) ¡ (*4) ¡ Logical Device ¡ (*11) ¡ ¡ ¡ Expansion LUN Concatena- ¡ (*11) ¡ ¡ ¡ tion FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... -
Page 147: Number Of Processes That Can Be Executed Simultaneously
The total capacity of TPV balancing and RAID Migration processes that can be performed at the same time is • 128TB. FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-8992-14ENZ0... - Page 148 However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual. Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information •...